User's Manual
Table Of Contents
- 1 System Overview
- 2 Features Summary
- 3 EXACT-V2 Rack
- 3.1 EXACT-V2 mechanics
- 3.2 Interface characteristics
- 3.3 Front Panel signalization (LEDs description)
- 3.4 Power requirements
- 3.5 Performances and technical characteristics
- 3.5.1 General characteristics
- 3.5.2 Control and data Ethernet interfaces
- 3.5.3 Serial control interfaces
- 3.5.4 ASI inputs / output and MPEG-TS processing
- 3.5.5 Digital modulation
- 3.5.6 Clock synchronization
- 3.5.7 RF and monitoring outputs
- 3.5.8 Digital precorrection
- 3.5.9 Power level measurement inputs and AGC
- 3.5.10 Dry contacts
- 3.6 Conformity with EC Directive
- 4 EXACT-V2 Installation
- 5 Operation
- 6 Maintenance & Troubleshooting
- Appendix A GPS Installation Recommendations
- Appendix B Example of GPS Antenna
USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 43/94
ASI Stream Output interface
x 1
General
Function:
ASI Output
Standard:
DVB-ASI
Name:
ASI_Out
Connector:
BNC Connector–impedance 75Ω
Type:
Output
Performances
Data Rate:
ASI: 80 Mbps maxi.
Mode/Format (Out):
Packet mode/188-byte
Figure 25: ASI Output interface
Electrical Gigabit Port
(Data & Control)
x 2
General
Function:
Gigabit Ethernet Port
Standards:
Ethernet, IP
Connector Name:
Gigabit1/Ctrl & Gigabit2
Connector Type:
RJ-45
Type:
Input/output
Performances
Data Rate:
1 Gbps max
Ethernet:
10/100/1000 Base T
Packet Type:
IPv4 – IPV6 Ready
Protocols:
IEEE802.3, IPv4, IPv6, XML, FTP,
SNTP
Jitter Tolerance:
50 ms
Mode:
Half/full duplex
Stream Encapsulation:
Accept IP and ALP formats (ATSC3.0)
FEC Decoding
SMPTE-2022 [I7 & I8]
Figure 26: Electrical Gigabit Data Interfaces
Figure 27: Electrical Gigabit Control Interfaces