User's Manual
Table Of Contents
- 1 System Overview
- 2 Features Summary
- 3 EXACT-V2 Rack
- 3.1 EXACT-V2 mechanics
- 3.2 Interface characteristics
- 3.3 Front Panel signalization (LEDs description)
- 3.4 Power requirements
- 3.5 Performances and technical characteristics
- 3.5.1 General characteristics
- 3.5.2 Control and data Ethernet interfaces
- 3.5.3 Serial control interfaces
- 3.5.4 ASI inputs / output and MPEG-TS processing
- 3.5.5 Digital modulation
- 3.5.6 Clock synchronization
- 3.5.7 RF and monitoring outputs
- 3.5.8 Digital precorrection
- 3.5.9 Power level measurement inputs and AGC
- 3.5.10 Dry contacts
- 3.6 Conformity with EC Directive
- 4 EXACT-V2 Installation
- 5 Operation
- 6 Maintenance & Troubleshooting
- Appendix A GPS Installation Recommendations
- Appendix B Example of GPS Antenna
USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 47/94
Monitoring Output
x 1
General
Function:
Monitoring output
Standards:
ATSC
Name:
Monit Out
Connector:
SMA – 50 Ω
Type:
Output
Performances
Frequency:
See RF Output
Level:
-20 dB (relative to RFout)
Other:
Monitoring Output (with OPT-
20dB internal preamplifer)
x 1
General
Function:
Monitoring output
Standards:
ATSC 1.0 / ATSC 3.0
Name:
Monit Out
Connector:
SMA – 50 Ω
Type:
Output
Performances
Frequency:
See RF Output
Level:
-43 dB (relative to RFout)
Other:
Monitoring signal from modulator
board (before amplifier)
Figure 33: Monitoring output