User's Manual
Table Of Contents
- 1 System Overview
- 2 Features Summary
- 3 EXACT-V2 Rack
- 3.1 EXACT-V2 mechanics
- 3.2 Interface characteristics
- 3.3 Front Panel signalization (LEDs description)
- 3.4 Power requirements
- 3.5 Performances and technical characteristics
- 3.5.1 General characteristics
- 3.5.2 Control and data Ethernet interfaces
- 3.5.3 Serial control interfaces
- 3.5.4 ASI inputs / output and MPEG-TS processing
- 3.5.5 Digital modulation
- 3.5.6 Clock synchronization
- 3.5.7 RF and monitoring outputs
- 3.5.8 Digital precorrection
- 3.5.9 Power level measurement inputs and AGC
- 3.5.10 Dry contacts
- 3.6 Conformity with EC Directive
- 4 EXACT-V2 Installation
- 5 Operation
- 6 Maintenance & Troubleshooting
- Appendix A GPS Installation Recommendations
- Appendix B Example of GPS Antenna
USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 7/94
Associated publications
The reader of this document could improve their understanding of the product and
its effective use by reading the following documents:
[A1]
ATSC standards
A/53, A/54
http://www.atsc.org/standards.html
[A2]
DVB Measurements
ETSI TR 101 290 v1.2.1
www.dvb.org
[A3]
ATSC Compliance
A/64
http://www.atsc.org/standards.html
[A4]
SFN Network in ATSC
A/111
http://www.atsc.org/standards.html
Table 1: Relevant standards for ATSC
[A6]
Physical Layer Protocol
A/322
http://atsc.org/standards/atsc-3-0-standards/
[A7]
Link-Layer Protocol
A/330
http://atsc.org/standards/atsc-3-0-standards/
Table 2: Relevant standards for ATSC 3.0
[D1]
DVB ASI
EN50083-9, ETSI TR101 891 v1.1.1
http://atsc.org/standards/atsc-3-0-standards/
[D2]
MPEG-2 TS Standard
ISO/IEC 13818-1
http://www.iso.org
Table 3: Other standards
[I1]
IP
RFC-791
www.ietf.org
[I2]
UDP
RFC-768
www.ietf.org
[I3]
RTP & MPEG/RTR
RFC-1889 / RFC-2250
www.ietf.org
[I4]
IP Multicast
RFC-2365
www.ietf.org
[I5]
Ethernet
IEEE-802.3
http://www.ieee802.org/3/
[I6]
Multicast protocol IGMP
RFC-2236 / RFC-3376
www.ietf.org
Table 4: Relevant standards for IP