User's Manual
Table Of Contents
- 1 System Overview
- 2 Features Summary
- 3 EXACT-V2 Rack
- 3.1 EXACT-V2 mechanics
- 3.2 Interface characteristics
- 3.3 Front Panel signalization (LEDs description)
- 3.4 Power requirements
- 3.5 Performances and technical characteristics
- 3.5.1 General characteristics
- 3.5.2 Control and data Ethernet interfaces
- 3.5.3 Serial control interfaces
- 3.5.4 ASI inputs / output and MPEG-TS processing
- 3.5.5 Digital modulation
- 3.5.6 Clock synchronization
- 3.5.7 RF and monitoring outputs
- 3.5.8 Digital precorrection
- 3.5.9 Power level measurement inputs and AGC
- 3.5.10 Dry contacts
- 3.6 Conformity with EC Directive
- 4 EXACT-V2 Installation
- 5 Operation
- 6 Maintenance & Troubleshooting
- Appendix A GPS Installation Recommendations
- Appendix B Example of GPS Antenna
USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 73/94
5.1 Operation Generalities
5.1.1 Local Operation
The product can be locally controlled using the front panel menu. It is composed of an
LCD screen and 6 buttons to navigate the control/monitoring menu.
The primary features are available using the front panel but for complete access to the
unit, please use the web GUI.
5.1.2 Remote Operation
The product can be controlled using any web browser. It allows the user to control,
monitor, and maintain the unit.
Below are the system requirements:
• PC using a Pentium 1GHz or higher microprocessor
• Microsoft Windows Vista/XP or Windows 2000 Service Pack 3 or later
• 1024 x 768 resolution (or higher) video adapter
• Minimum of 128 MB of RAM (256 MB recommended)
• 120 MB of disk space
• A Microsoft-compatible mouse
The web GUI can be accessed via any web browser using the IP address of the unit. By
default, this address is 192.168.0.209. The IP address can be retrieved/modified using
the front panel menu.
Figure 42
: EXACT-
V2 IP connection