User's Manual
Table Of Contents
- 1 System Overview
- 2 Features Summary
- 3 EXACT-V2 Rack
- 3.1 EXACT-V2 mechanics
- 3.2 Interface characteristics
- 3.3 Front Panel signalization (LEDs description)
- 3.4 Power requirements
- 3.5 Performances and technical characteristics
- 3.5.1 General characteristics
- 3.5.2 Control and data Ethernet interfaces
- 3.5.3 Serial control interfaces
- 3.5.4 ASI inputs / output and MPEG-TS processing
- 3.5.5 Digital modulation
- 3.5.6 Clock synchronization
- 3.5.7 RF and monitoring outputs
- 3.5.8 Digital precorrection
- 3.5.9 Power level measurement inputs and AGC
- 3.5.10 Dry contacts
- 3.6 Conformity with EC Directive
- 4 EXACT-V2 Installation
- 5 Operation
- 6 Maintenance & Troubleshooting
- Appendix A GPS Installation Recommendations
- Appendix B Example of GPS Antenna
USER
MANUAL
MPD-1611291-A
EXACT-V2 High End Rack Modulator / Exciter
3/10/2017
MPD-1611291-A
Page 6/94
About this manual
Intended audience
This user manual has been written for those who have to use, configure and install
the product. Some chapters require some prerequisite knowledge in electronics and
especially in broadcast technologies and standards.
Product described
The following products are described in this user manual:
EXACT-V2
EXACT-V2-20dB
Commercial references and available options
Product ref. Description
EXACT-V2
EXACT-V2-20dB
ATSC rack modulator with UHF/VHF* output, DAP and onboard GPS
Optional +20dBm, output, DAP and onboard GPS
EXACT-ATSC 3 VP
EXACT-ALP3
ATSC 3.0 software license (Single PLP)
ALP software license (3.0)
Document structure :
• Chapter 1 – System Overview
This chapter gives an overview of the product.
• Chapter 2 – Features Summary
This chapter describes the features found in the product.
• Chapter 3 – EXACT-V2 rack
This chapter describes the mechanics, characteristics and performances
of the product.
• Chapter 4 – Module Installation
This chapter explains how to install the product.
• Chapter 5 – Operations
This chapter explains how to basically operate the product.
• Chapter 6 – Maintenance and Troubleshooting
This chapter gives recommendation on how to maintain the product and
how to perform first level Troubleshooting in the event of technical issues.
*Specify at the time of order: UHF, VHF Band 3, or VHF Band I