User's Manual

1. The product is for indoor use only.

2. Do not install the product near devices that generate heat or moisture, such as

air conditioners, heaters, and humidifiers, or where direct sunlight comes in.

3. Do not Install the product that its display towards the glass, window, air

conditioner, heater, or other heat-related equipment. (This product uses infrared

fever detection and may affect accuracy.)

4. For normal operation of the product, recommend to use it after operating for a

certain period of time (3~5 minutes) after installation.

5. Install the product in a proper place to prevent it from tipping over.

6. For accurate fever check, check according to the face shape displayed on the screen.

7. Read the instruction manual in order to better use the product.

1. If smoke, odors or noise rise from the product, turn off the power at once and

unplug the power cable, and then please contact the service center. It may

cause a fire or electric shock and it becomes cause of breakdown.

2. Please make sure that the power has been disconnected before you wire, install or

dismantle the product.

3. Please use a soft and dry cloth when clean inside and outside surfaces of the product.

Moisture may cause a fire, electric shock and malfunction.

4. Low ventilation may cause a fire, electric shock and malfunction .

5. Do not dismantle or remodel the product and it may cause a fire, electric shock and

malfunction

6. Do not clean with a hard cloth or drugs or chemicals, insecticides, such as paint thinner

, acetone, etc. that may hurt the product.

Precaution : Installation & Maintenance