TV VCR Combo User Manual

NORMAL PLAYBACK

Make sure...

• Power must be turned on.

1 Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback

automatically

2 To begin playback

Press PLAY button.

3 To stop playback

Press STOP button when playback is completed.

TRACKING ADJUSTMENT

• Tracking adjustment will be set automatically (Digital Tracking function-DTR)

when you start playback.

NOTE: The following function is controlled only by the buttons on the VCR.

• When playing pre-recorded tapes or tapes recorded on units other than your

own, noise lines (black and white streaks) may appear on the playback

picture. If this occurs, you can adjust the tracking control manually by

pressing CH or button until the streaks disappear. To return to the DTR

function, stop the tape once and start playback again.

• You can reduce the noise lines by pressing CH or button in slow

mode, too. Slow tracking adjustment will not be set automatically.

Note: In Still mode, press SLOW button and press CH or button until the

streaks disappear. To return to Still mode, press PAUSE/STILL button again.