Manual

TIMER
You may set the TV/VCR to start and end a recording
while you are away. You can set 8 programs to record
on specific days, daily or weekly within a I year period.
In the example below, the timer is being set to record:
DATE: MAY 6th, 1997
SETTING TIME: fiom 7:30PM to 8:50PM
CHANNEL: CI-t61
TAPE SPEED: LP
Make sure ...
• Use the remote control for this procedure.
• If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes 3
or 4 and then the actual channel to be recorded must
be selected on the boxes.
• (:lock must be set to the correct time and date before
setting the timer.
• TV/VCR power must be turned on to program it.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
1 Select "TIIVIER PROGRAMMING"
Press the MENU button.
Confirm "TIMER PROGRAM-
MING" is pointed.
Then, press the F.FWD/I_ -
button.
I -MENU-
TMER pAOGRAMMING
PICTURE COIMIROL
SETTING CLOCK
CHANNEL SET UP
USERS SE[ UP
L_.NGUAGE [ENGI.ISH]
CAPTION [CApTIONll
TqMESEARCH
I_.DEX SEP,RC,_
• If you have not yet set the clock, "MANUAL
CLOCK SETTING" appears. If so, follow stops [3]
to [81 on page., 15. Then set the timer recordir_g.
_: S:lect'vo_,: .: _:_;plogr i_!_:Jmber(1--8)
I'ress the PLAY/A, or STOP/V (_ .................. "]
button to select the desired I_. ,_ _,,_-_,0
Then, press the F.FWD/I_ ' ii }ii
button.
P,ess the PLAY/A, or STOP/Y /_ .................. '1
bntton until the desired channel I 2:_ D: TE S'ART i:: _
number appears (Example: , ..........
Then, press the F.FWD/I_
button.
• The channel you want to record is properly, set in
advance. (See page 13) 4 Select once every day or weekly recording
=For once recording :
Avoid over lap of programs ...
There is a case that a program will not be performed.
When programs overlap:
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping
programs wilt begin recording in sequence.
• The illustration below demonstrates the sequence of
recordings.
Program 1 10:00AM - 11:00AM
Program 2 9:00AM - 10:00AM
Program 3 11:00AM - 12:00PM
Recording Sequence
Program 1 ',
10:00AM - 11:00AM _
Program2 _' ' ',
9:00AM - 11:00AM _ _,
Program 3 " I "
9:30AM - 12:00PM , I
i i i
9:00AM 10:00AM 11:00AM 12:00PM
*Recording period is SHADED
Press the PLAY/,A. (up)
button until :he desired date
appears. (Example: "5106" lk)r
Ma:_ 6th). Then, press the
F.FWD/I_ button.
I IMEP pEOGRAMMING 1
:g _'-3_ E:S_:: :--- _
For every day recording : To recmd a 7V program at
the same time on the s'ame chamwi every day. (Example:
Mort day th t'oItg]! S'ozday) (--- ................ -_
I
Press the STC, P/'Y (down.) _ °9 __ i'-_' i"°
button until "EVERY DAY" r:_ I:i:: ::: :
appears. Then, press the '% ........ _ .....
For weekly recordDzg : To record a TV program r[-tthe
same time on the same channel e_,ery week. (Example."
every Monday on channel 7 at 5.'OOPM)
Press the STC.P/V (down)
button until "EVERY" and
your desired day of the week
appear together. Then, press
the F.FWD/I_ button.
_ TIMEF_ DR O_RAMMING - 1
OH DATE START INO
- 26 -