Color profile: Disabled Composite Default screen Instructions for use 15LD3200 20LD3200 GB T:\IB-YENI\IB-KITAPLAR\TV-KITAPLARI\Models\TFT TV-MONITOR IB\32 INCH TFT\32 INCH 17MB15 TRIDENT\HITACHI\-----IDTV-----\32LD8700 U (INGILTE 20 Ekim 2006 Cuma 13:55:45
Contents Remote Control Buttons ....................... 2 Teletext .................................................. 15 Control Panel Buttons ........................... 3 To Operate Teletext ............................. 15 To Select A Page Of Teletext .............. 16 To Select Index Page .......................... 16 To Select Teletext With A TV Programme ......................................... 16 To Select Double Height Text ............. 16 To Reveal Concealed Information ....
Remote Control Buttons = Stand By = Cursor Up = Cursor Right OK = Okay (Store) = Info 0 - 9 = Direct Programme = Image size =Previous Programme P/CH + = Programme Up + = Volume Up = TV / Quit Menu = External Source (AV-1, RGB1, AV-2, SVHS) Yellow button Blue button = Hold = Update = Index Page = Reveal / PC = No Function = Expand = Mix = Teletext = Time / Subcode page Red button Green button = Mute I-II = Mono/Stereo - Dual I-II - = Volume Down - P/CH = Programme Down = Color temperature settings M = Menu
Control Panel Buttons 79 $9 0(18 352*5$00( 83 '2:1 0(18 1$9,*$7,21 92/80( 83 '2:1 0(18 1$9,*$7,21 32:(5 21 2)) +($'3+21( /(' 63($.(5 63($.(5 ,1)5$5(' 5(&(,9(5 )227 723 &29(5 -350091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO 3 PC.p65 31.07.
Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in moderate climates. When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. PLL (Frequency Search) Panel Features High resolution (1024 x 768), 15-inch TFT LCD display.
should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician. DONTs DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets.
5. Ventilation The slots and openings on the back cover are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. Cold cathode fluoresant lamp in LCD PANEL contains a small amount of mercury, please follow local ordinates or regulations for disposal. 6. Heat and Flames The set should not be placed near to naked flames and sources of intense heat, such as an electric heater.
Sockets for external connections are at the rear side of the TV. For connection of other devices via SCART refer to the manuals of the related devices. Before Switching On Your TV Power Connection Inserting Batteries In The Remote Control Handset Remove the battery cover located on the back of the handset by gently pulling upwards from the indicated part. Insert two AAA (R03) or equivalent type of batteries inside. $& DGDSWHU 7R 32:(5 ,1387 '& 9 Replace the battery cover.
Either way the TV will switch on and the LED becomes green. ,1,7,$/ $ 3 6 :$51,1* 3O HDVH &KHFN To switch the TV off: WKH $QWHQQD &DEOH Press the button on the remote control, so the TV will switch to stand-by mode and the GREEN LED will become RED, or, Press the button located on the right side of the TV, so the TV will switch off and the GREEN LED will turn off. 0! WR FDQFHO 2.! WR VWDUW If you want to cancel A.P.S. function, press the M button. If OK button is pressed, A.P.S.
AV Mode Press the TV / AV button at the control panel on the right side of the TV to switch your TV to AV modes. Operating With Remote Control The remote control handset of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. Functions of the menu system are described in Menu System section. Volume Setting + button to increase volume. Press the Press the button to decrease volume.
sharpness volume By pressing / button, select sharpness. Press button to increase sharpness. Press button to decrease sharpness. Sharpness level can be adjusted between 0 and 100. By pressing / button, select volume. Press button to increase volume level. Press button to decrease volume level. Volume level can be adjusted between 0 and 50. colour balance By pressing / button, select colour. Press button to increase colour.
Press or button to select Normal or Extended. Extended effect mode is used to get deep sound impression from loudspeakers. sound style By pressing / button, select sound style. Press or button to change sound style setting. The available styles are: Theatre, Music, Voice and User. A sound style consists of equalizer settings. equalizer menu By pressing / button, select the second icon. Equalizer menu appears on the screen. volume By pressing / button, select volume.
Press / button to select dynamic skin tone. By pressing / button, turn skin tone ON/OFF. options menu By pressing / button, select the fourth icon. Options menu appears on the screen. settings menu R S WL R Q V U R RP O LJ K WL Q J V OH H S W LP H U F K LO G OR F N By pressing / button, select the fifth icon. Settings menu appears on the screen. R SD T X H P H Q X ED F N J U R X QG OD Q J X D J H By pressing / button, select child lock.
program name program skip By pressing / button, select program name. Program name has a name string with 5 characters. Press button to select a character and / button to change it. After the program name is entered, press button to exit. Use this feature after you run A.P.S. to skip unwanted programs. manual search By pressing / button, select manual search. Press or button to start program searching manually. Press M button to cancel manual search process.
A.P.S. (Auto Programming System) teletext language By pressing button, select the third icon. A.P.S. menu appears on the screen. By pressing / button in the Settings menu, select teletext language. There are three options to select : Europe, Cyrillic and Greek.
Mute Indicator It is placed in the upper right side of the screen when enabled. To cancel mute, there are two alternatives, the first one is pressing the button, thus the volume is set to the preceding value, and the second one is increasing the volume level, thus it starts from minimum level to increase. Previous Programme Pressing "P
To Select Double Height Text Press the button for the top half of the information page to be displayed in double height text. Press the button again for the bottom half of the information page to be displayed in double height text. Press the button once more for the full page of normal height text. To Select A Page Of Teletext Press the appropriate digit buttons for the required Teletext page number. The selected page number is displayed in the top left corner of the screen.
Fastext Your TV supports the Fastext Teletext system. When the page number of any of the pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically. Press the P/CH+ button to move the Teletext screen forward one page at a time. Press the -P/CH button to move the Teletext screen backward one page at a time. For Fastext The subject-heading for the information may have a particular color.
Camera And Camcorder Connect a decoder without an aerial socket to the TV Connect the decoder to the TV with a SCART lead to SCART input. TV And Video Recorder Connect the aerial cables. Better picture quality can be obtained if you also connect a SCART lead to SCART socket. Playback NTSC Connect your camera or camcorder to AV-2 input at the rear side of the TV. Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs.
Peripheral Equipment Connections $ $(5,$/ % '& 9 & 6 9,'(2 ,1387 ' 9,'(2 ,1387 ( $8',2 ,1387 5 ) $8',2 ,1387 / 9 9 9 9 * /,1( 287 5 + /,1( 287 / , 6&$57 62&.(7 $9 $9 - 19 50091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO 19 PC.p65 31.07.
Aerial Connections 2XWGRRU $HULDO &RQQHFWLRQV 9+) $HULDO 5RXQG RKP FRD[LDO FDEOH : 9+) 8+) 5HDU RI 79 Connect Peripheral Equipment HEADPHONE AUDIO $8',2 ,1 / 9,'(2 ,1 5 VIDEO ,1 287 ,1 '%1'36()6 $17 ,1 FOR SATELLITE RECEIVER DECODER $HULDO - 20 50091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO 20 PC.p65 31.07.
Sound Tips You can not hear any sound. Did you per- Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images.
Specifications TV BROADCASTING PAL SECAM B/G D/K K I/I L/L RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) AUDIO OUTPUT POWER (WRMS.) (%10 THD) 2x3 POWER CONSUMPTION (W) (max.) 41 W < 3 W (Stand-by) PANEL 4:3 display, 15 Screen Size Dimensions (WxHxD) W 455 mm. H 334 mm. with stand D 178 mm. with stand 59 mm. without stand Weight 4.4 Kg.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
QUICK GUIDE EU 15LD3200 IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation.
EU ...or through a satellite decoder... Aerial RF Lead from Satellite to TV • Scart Lead to AV-1 on TV. TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ...or through a VCR and satellite decoder. • Scart Lead to AV-1 on TV. RF Lead from VCR to TV RF Lead from VCR to Satellite Aerial TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ANT.
EU connect the TV plug to the mains socket insert plug... ...and switch on insert plug... Plug for Europe Plug for UK TV/AV TV/AV MENU MENU switch your TV on, ready to start Auto Setup procedure... To switch on the TV first press the " " button on the TV, then press one of the number buttons on the remote control or Prog + or Prog - on the set.
EU important note before starting Auto Setup If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. These measures ensure that all your external equipment is tuned in during the Auto Setup procedure. start Auto Setup procedure 1 First select the country by using the “ ” or “ ” buttons on the remote A.P.S. control.
Hitachi Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.com Tel: 1 - 6837200 Fax: 1 - 6835694 Email: dmgservice.gr@hitachi-eu.