Operation Manual

- 13 -
program name
By pressing 
 /   button, select program
name. Program name has a name string with
5 characters. Press 
 button to select a
character and 
 /   button to change it.
After the program name is entered, press 

button to exit.
manual search
By pressing 
 /   button, select manual
search. Press 
 or   button to start pro-
gram searching manually. Press M button
to cancel manual search process.
Note: When Standard is selected as Auto,
manual search does not find SECAM L/L'
channels. Therefore L/L has to be selected
in the Standard menu for SECAM L/L chan-
nels (SECAM is the broadcast system used
in France).
standard
Press 
 /   button to select standard. By
pressing 
 /   button, you can change
the standard to AUTO, BG, I, DK or L/L'.
When AUTO is selected, the sound standard
is adjusted automatically.
store
Press   /   button to select store. By
pressing 
 button, you can store the pro-
gram settings.
You can also store a setting by pressing
OK button on the selected setting.
STORED is displayed on screen when a
program is stored.
frequency
By pressing 
 /   button, select fre-
quency. Press 
 button to select the first
digit and digit buttons on remote control to
enter the frequency you want. After the fre-
quency is adjusted, press 
 button to exit.
fine tuning
By pressing 
 /   button, select fine tun-
ing. Press 
 /   button to change the fre-
quency value.
program skip
Use this feature after you run A.P.S. to skip
unwanted programs.
By pressing 
 /   button, select program
skip. Press 
 /  button to select on or
off. When on is selected, current program
cannot be reached by pressing -P/CH or
P/CH+ button. But digit button can be used
to reach it.
program table
By pressing   /   button, select the sec-
ond icon. Program table appears on the
screen.
Program table shows the programme num-
bers and the names assigned to the
programmes.
Here you can adjust the channel order by
moving or deleting the channels.
First of all press the 
 button.
Using the GREEN button you can move a
programme into another programmes loca-
tion. Press the direction buttons to select a
programme and press the GREEN button.
Then select another programme and press
the GREEN button again. The first selected
programme moves into the location of the
second selected programme.
Using the RED button you can delete any
programme you want.
(This may take a few seconds to activate af-
ter you have pushed the GREEN or RED
buttons)
50091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO PC.p65 31.07.2006, 17:3313