Operation Manual

- 15 -
Previous Programme
 Pressing "P<P" (Previous Programme) but-
ton consecutively allows to swap between
the last two programmes.
For example, select programme 8, then select
programme 2. Now, if you press the P<P
button, programme 8 will be displayed. If you
press the same button again, programme 2
will be displayed and so on.
Sound Indicator
I-II button is used to select Mono, Stereo,
Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for
stereo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected
in default and also can be selected after
Dual II by Remote Control.
'XDO,,
If Dual II selected by Remote Control.
Mute Indicator
It is placed in the upper right side of the
screen when enabled.
To cancel mute, there are two alternatives,
the first one is pressing the 
 button, thus
the volume is set to the preceding value, and
the second one is increasing the volume
level, thus it starts from minimum level to in-
crease.
AV Modes
By pressing the   button, you can switch
your TV to AV modes (except being in Tele-
text). Pressing this button consecutively will
switch the TV in one of the optional AV
modes: AV1, RGB1, AV2 and SVHS.
RGB1 mode is supported from AV1.
In order to quit the AV mode press the  ,
the digit buttons or the -P/CH or P/CH+.
Teletext
Teletext is an information system that dis-
plays text on your TV screen. Using the Tele-
text information system you can view a page
of information on a subject that is available in
the list of contents (index).
On screen display is not available in text
mode.
Contrast, brightness or colour control is not
available, but volume control is available in
text mode.
To Operate Teletext
 Select a TV station where Teletext is being
transmitted.
 Press the   button. Usually the list of con-
tents (index) are displayed on the screen.
50091569-1-1511-ENGLISH-1551 UK-15inchPixelWorks-17MB18-(LAU)-WO PC.p65 31.07.2006, 17:3315