User Guide
- 15 -
Press button to increase brightness.
Press
button to decrease brightness.
Setting Contrast
Using
or button select Contrast.
Press
button to increase contrast level.
Press
button to decrease contrast level.
Setting Colour
Using or button select Colour.
Press
button to increase colour level.
Press
button to decrease colour level.
Setting Sharpness
Using or button select Sharpness.
Press
button to increase sharpness
level.
Press
button to decrease sharpness
level.
Setting Picture Mode:
Using or button select Picture Mode.
Press
or button to set Picture Mode.
Picture Mode can be set to Auto, 4:3, 16:9,
Cinema, Subtitle, Zoom or Panorama.
Setting Noise Reduction
Using or button select Noise Re-
duction.
Press
or button to select Noise Re-
duction level Off or Minimum or Me-
dium or Maximum then select store and
press
or button to save your setting.
Note 1:
At low signal level, changes on the Noise Reduction
function are not effective when there is a menu on the
screen. If the menu is removed, the effect of this func-
tion will be seen. With normal broadcasting, Noise Re-
duction changes are effective at once.
Note 2:
At moving pictures, while Noise Reduction is at maxi-
mum level, some picture distortion may occur. If Noise
Reduction is set to medium or minimum, the picture will
improve.
ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220U.p65 01.12.2004, 14:1315