User Guide

- 21 -
Double-digit (- / - -)
This OSD is displayed when the "Double-
Digit" button pressed in place of the pro-
gramme number indicator.
In order to enter a two digit programme
number you must push both numbers within
3 seconds. If the second number is not en-
tered within 3 secs the display will disap-
pear.
Personal Preferences (PP)
All the preset values will be restored, when
pressing "PP".
Sound Indicator
The alternatives of the indicator are Mono,
Stereo, Dual I and Dual II. This indicator is
displayed under the programme number in-
dicator on the screen. "I-II" button is used to
select Mono or Stereo, or Dual I or Dual II.
In Mono broadcast or in forced-mono (for
stereo broadcast).
In Stereo broadcast.
If dual broadcast detected. Dual I is selected
in default and also can be selected after
Dual II by Remote Control.
If Dual II selected by Remote Control.
Picture Mode
Picture mode OSD is displayed when
button is pressed. Picture mode can be
changed to Auto, 4:3, 16:9, Cinema, Sub-
title, Zoom or Panorama by pressing
button.
Sleep Timer Indicator
It is displayed on the upper right of the
screen when a new programme is entered
by digit button or by pressing P<P, -P/CH,
P/CH+,
, or  button. If sleep
timer is activated it is displayed with the TV
status and erased with it after 3 seconds.
Once the time set with the sleep timer has
elapsed, the set will go to standby.
Mute Indicator
It is placed in the upper middle of the screen
when enabled, and it stays there until it is
disabled.
To cancel mute, there are two alternatives;
the first one is pressing "
" button, the vol-
ume is set to the preceding value. The sec-
ond one is increasing the volume level,
whereby it starts at the minimum level to in-
crease. By decreasing the volume level in
mute state, mute will not be ignored, only the
volume level will decrease. If mute is can-
celled after decreasing the volume level, the
volume will be set the decreased level.
ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220U.p65 01.12.2004, 14:1321