Operation Manual

- 24 -
To Stop Automatic Page Change
The teletext page you have selected may
contain more information than what is on the
screen; the rest of the information will be
displayed after a period of time.
 Press 
 button to stop the automatic
page change.
 Press 
 button again to allow the next
page to be displayed.
To Select a Subpage
Subpages are subsections of long Teletext
pages that can only be displayed on the
screen one section at a time.
 Select the required Teletext page.
 Press 
 button.
 Select the required subpage number by
pressing four digit buttons (e.g. 0001).
 If the selected subpage is not displayed in a
short time, press 
 button. TV
programme will be displayed on the screen.
 Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
 Press   button to display the selected
Teletext page.
Fastext
(This is applicable if your TV is equipped with
FASTEXT feature)
Your TV supports the 7 page Teletext system.
When the page number of any of the 7 pages
in memory is entered, the system will not
search for the requested page; instead it will
display the page automatically.
 Press P/CH + button to move the Teletext
screen forward one page at a time.
 Press - P/CH button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
 Press an appropriate Red, Green, Yellow or
Blue button in order to reach the relevant
page quickly.
To exit Teletext
 Press TV or   button. The screen will
switch to TV mode.
To Display the Time
 While watching a TV programme with Tele-
text transmission press   button. The
current time information, captured from Tele-
text will be displayed at the upper right of the
screen until the 
, AV or M button
pressed.
 If the programme being watched does not
have Teletext transmission, no information
will be displayed.
Peripheral Equipment
Connections
There is a wide range of audio and video
equipment that can be connected to your TV.
Connection diagrams at the and of this sec-
tion show you where the different equipment
should be connected at the back side of the
TV.
PC Sound Connection
 Connect the PC Audio output to the TFT PC
Audio In socket with stereo connection
cable.
 In the main menu select "Feature" using  
or   button then enter the Feature menu
pressing 
,   or OK button. Come on
"PC Sound Mode" using   or   button
and select PC from the TV, AV-1, AV-2, AV-3
and PC options using  ,   or OK but-
ton.
ENG-2200-1547UK-22 INCH TFT IB.p65 03.03.2004, 18:0024