Operation Manual

Once the TV has found all your local stations, they are then automatically

assigned a programme number and name, if available from the broadcast.

important note.

start A.P.S. (Auto Programming System)

When the TV is operated for the first time, installation wizard will guide you

through the process. First, language selection screen will be displayed.

• Use "up" or "down" buttons to select your language and press OK

button to set selected language and continue.

• After selecting the language, “First Time Installation” screen will be

displayed, requiring you to set Country, Search Type, Teletext

Language and Scan Encrypted options.

Please select Aerial option and press OK button to continue, a message

asking for the starting process appears on the screen. To continue please

select YES and press OK. To cancel operation, select NO and press OK.

Note: As the Cable feature is not supported in the UK, please ensure that you

select Aerial during the First Time Installation. If you mistakenly select Cable,

please repeat the First Time Installation (which can be selected from the

tuning menu) and select Aerial.

• By pressing "left" or "right" button, select the country you want to set press

"down" button to highlight Search Type option. Use Left or Right button to

set the desired Search Type. Available search types are digital only,

analog TV only and full. When set, press Down button to highlight Teletext

Language. Use "left" or "right" button to select desired Teletext Language.

•Press "down" button after setting Teletext Language option. Scan

Encrypted will be then highlighted. You can set Scan Encrypted as Yes if

you want to scan coded stations.

• Press OK button on the remote control to continue and the 'Please

select digital search type.” message will be displayed on the screen.

50311455