User's Manual

BEFORE OPERATING YOUR TV SET

ANTENNA CONNECTIONS

These sets are equipped with one VHF/UHF antenna terminal. The VHF/UHF terminal

can be used for normal TV, cable TV (CATV), a TV game, etc.

1. VHF (75 ohm) antenna/CATV

When using a 75 ohm coaxial cable system, disconnect the VHF adaptor from the VHF

75 ohm receptacle and connect the outdoor antenna or CATV cable to a VHF 75 ohm

receptacle

2. VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, disconnect the (VHF or

UHF) indoor antenna leads from screws of the (VHF or UHF) adapter, and connect

outdoor (VHF or UHF) antenna leads to these screws of a (VHF or UHF) adapter.

3. When both VHF and UHF antennas are connected

Attach an optional ANT. MIXER to the TV antenna terminal, and connect the cables to

the ANT. MIXER.

Notes

1. If an outdoor antenna/CATV is to be used, disconnect the indoor antenna. Do not leave

both the indoor and outdoor antennas/ CATV connected at the same time, since ghosting

and poor reception may result.