Operation Manual

English - 7 -
Connections (depending on the model)
NOTE: When connecting a
device via the YPbPr or Side
AV input, you must use the
connection cables to enable
connection. For Side AV input you
should use the supplied cable. See
the illustrations on the left side. |
You can use YPbPr to VGA cable
(not supplied) to enable YPbPr
signal via VGA input. | You cannot
use VGA and YPbPr at the same
time. | To enable PC/YPbPr audio,
you will need to use the Side AV
input with a YPbPr/PC audio
cable (not supplied) for audio
connection, using the supplied
Side AV connection cable’s RED
and WHITE inputs.| If an external
device is connected via the SCART
socket, the TV will automatically
switch to AV mode.| When receiving
DTV channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available via the
scart socket. | When using the
wall mounting kit (available from
third party in the market, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. | Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should refer
to the module instruction manual for
details of the settings. | The/Each
USB input of your TV supports
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. | By connecting an HDMI cable
to your TV, you have to use only a
shielded HDMI cable to guarantee a
sufcient immunity against parasitic
frequency radiation.
If you want to connect a device
to the TV, make sure that both
the TV and the device are
turned off before making any
connection. After the connection is
done, you can turn on the units and use
them.
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr Audio
Connection
(side)
PC/YPbPr Audio
Cables
(not supplied)
SIDE AV
PC/YPbPr Audio
Connection
(side)
YPbPr/PC Audio
Cable
(not supplied)
Side Audio/Video
Connection Cable
(supplied)
HDMI
Connection
(back)
SPDIF
(Coaxial Out)
Connection
(back)
SPDIF
SPDIF
(Optical Out)
Connection
(back)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
Side AV Connection
Cable ( not supplied)
SIDE AV
Side AV
(Audio/Video)
Connection
(side)
Audio/Video
Cable
(not supplied)
Side Audio/Video
Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
PC to YPbPr Connection
Cable (not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
RF Input connects to an aerial or cable system. (depends on model)
SAT
Satellite (LNB) Input connects your TV to a satellite system. (depends on model)