Instructions for use 32LD8600 GB Bedienungsanleitung D Notice d'utilisation F Istruzioni per l'uso I
Contents Remote Control Buttons ......................... 2 Teletext .................................................. 18 LCD TV ..................................................... 3 Power Connection ............................... 8 Connections To The Aerial Input Socket8 How To Connect Other Devices ........... 8 Inserting Batteries In The Remote Control Handset ................................... 8 To Operate Teletext ............................ 18 To Select A Page Of Teletext ...............
Remote Control Buttons = Stand by On/Off = Picture Mode = Equalizer Sound Mode = Surround Mode = Input Source = Program Information = Sound Mode = Sleep Timer RED / = PAT (Picture and Text) GREEN / YELLOW / = Subtitle page in TV mode = Select active window in PIP mode BLUE = Only used in Teletext mode = Menu On/Off = Go back to previous menu a P+ = Programme Up / Cursor Up = Volume Down / Cursor Left _ OK = Enter = Volume Up / Cursor Right ` b P- = Programme Down / Cursor Down = Mute On/Off = Freeze
LCD TV FRONT VIEW 63($.(5 /(' 63($.(5 REAR VIEW 3RZHU &RUG ,QSXW 3RZHU 2Q 2II EXWWRQ 9 9 $&a +] -301-ENG-3230W-CLE967 UK-HITACHI 32 INCH3TFT-TRIDENT-(CHM)-50089001.p65 31.07.
79 $9 0(18 3 &+ TV/AV button Audio Line Outs MENU button Subwoofer Out Prog. Up, Prog. Down buttons PC Audio Input Volume Up, Volume Down buttons Operate/Standby switch Scart 2 (EXT-2) Power cord input Scart 1 (EXT-1) Power On/Off button EXT-4S S-VHS Input Video Input Audio Inputs Headphone Aerial HDMI Input (EXT-5) EXT-4 Component Audio Inputs Component Video (YPbPr) Inputs VGA Input -401-ENG-3230W-CLE967 UK-HITACHI 32 INCH4TFT-TRIDENT-(CHM)-50089001.p65 31.07.
Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in tropical and/or moderate climates. Features Remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician. DONTs DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages.
6.Heat and Flames The mains plug is used to disconnect the TV from the mains and therefore it shall remain readily operable. The set should not be placed near to naked flames and sources of intense heat,such as an electric heater. Ensure that no naked flame sources, such as lighted candles, are placed on top of the set. Warning: To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instrutions. 7.
Before Switching On Your TV Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections To The Aerial Input Socket NOTE: Remove the batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries.
Unplug the power cord from the mains socket. Initial Settings Initial APS (Automatic Programming System) The following menu will be displayed on the screen when you turn your TV on for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area. $872 352*5$0 (QJOLVK /DQJXDJH &RXQWU\ 8.
Press the P+ button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. The TV will switch to the selected programme after a short delay. For a two digit programme number enter the second digit after pressing the first digit within 2 seconds. Menu System Your TV has been designed with a menu system to provide easy manipulation of a multifunction system. Press the button to enter the menu.
Film Mode Films are recorded at a different number of frames per second to normal television programmes. By pressing a / b button, select Film Mode. Press _ / ` button to set this feature On or Off. Turn this feature on when you are watching films to see the fast motion scenes clearly.
Sound Mode SubWoofer By pressing a / b button, select Sound Mode. Press _ / ` button to change the mode. It is possible to connect an external, active subwoofer to the set to give a much deeper bass effect. By pressing a / b button, select Subwoofer. Subwoofer can be set to On or Off. You can select Mono, Stereo, Dual A or Dual B mode, only if the selected channel supports that mode. In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option.
Language Install menu By pressing a / b button, select Language. By pressing _ / ` button, you can select the language. By pressing _ / ` button, select the fourth icon. Install menu appears on the screen. Ext-2 Out ,167$// 3URJUDP By pressing a / b button, select Ext-2 Out. You can set Ext-2 Out to TV, EXT-1, EXT-3, EXT-4, EXT-5 or PC by pressing _ / ` button.
Search Name: By pressing a / b button, select Search. Press _ / ` button to start program searching. The searching will stop when a signal is found. You can also enter a frequency value directly by pressing the digit buttons. To change the name of a decided programme, select the programme and press the RED button. VCR (Video Cassette Recorder) This item can be seen in all modes except EXT-3, EXT-5 and PC.
Menu System in PC mode $36 LV UXQQLQJ 8. , 0K] &DQFHO After APS is finalized, the programme table will appear on the screen. Source menu By pressing _ / ` button, select the sixth icon. Source menu appears on the screen. Press the button. The menu will be displayed in the middle of the screen. PC Picture Position Menu By pressing _ / ` button, select the first icon. PC Picture Position menu appears on the screen.
Dot Clock Sound Menu Dot Clock adjustments correct interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. By pressing _ / ` button, select the third icon. Sound menu appears on the screen. Use _ / ` button to adjust the value. The items in this menu are described at Sound menu starting page 11.
PIP and PAP modes Press the Auto: button to switch to PIP mode. At PIP Mode, a small picture (PIP picture) is displayed on the main picture. There are 1 size and 4 positions (upper left, upper right, bottom left and bottom right) available for the PIP window. You can use button to change the PIP position. Aspect Ratio of the PIP window is fixed and 4:3. When PIP Mode is entered, the default active window is PIP window and the active window is indicated by a green frame around it.
To Select A Page Of Teletext Press the appropriate digit buttons for the required Teletext page number. 14:9 Zoom: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. The selected page number is displayed in the top left corner of the screen. The Teletext page counter searches until the selected page number is located, the desired page is then displayed on the screen. Press the a button to move the Teletext screen forward one page at a time.
To Stop Automatic Page Change The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. Press the button to stop the automatic page change. button again to allow the next Press the page to be displayed. To Select A Subcode Page Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Press the button.
For further information ask your dealer. See also the booklet supplied with your decoder. Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different (Optional) equipment should be connected at the rear side of the TV. High Definition Connect a decoder with an aerial socket to the TV Connect the aerial cable.
Replace the aerial cable in the aerial socket of your video recorder once you have stored the test signal. Camera And Camcorder To Connect To AV Input Connect your camera or camcorder to AV (EXT-4) input at the rear side of the TV. Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You must connect the jacks to the input using the same colour. To Connect To S-VHS Input Connect your camera or camcorder S-VHS input at the rear side of the TV.
Aerial Connection 2XWGRRU $HULDO &RQQHFWLRQ 5RXQG RKP FRD[LDO FDEOH : 9+) 8+) 5HDU RI 79 Connect Peripheral Equipment RU FRQQHFW WKH DHULDO WKURXJK D 9&5 HLWKHU FRQQHFW WKH DHULDO VWU DLJKW WR \RXU 79 7)7 /&' 79 $HULDO 5) 6RFNHW 5) FRQQHFWRU OHDG 9&5 WR 79 $HULDO 5) 6RFNHW 9&5 ZDOO $HULDO 5) VRFNHW ZDOO $HULDO 5) 6RFNHW /HDG $HULDO 5) VRFNHW $1 7 ,1 $9 /HDG $9 9&5 ,W LV UHFRPPHQGHG WKDW D VFDUW OHDG VKRXOG EH ILWWHG EHWZHHQ \RXU 79 DQG 9&5 WR HQKDQFH \RXU
Sound Tips You can not hear any sound. Did you per- Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images.
AUDIO OUTPUT POWER (WRMS.) (%10 THD) Specifications 2x8 TV BROADCASTING PAL/SECAM B/G D/K K' I/I' L/L' RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS 100 POWER CONSUMPTION (W) (max.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1366x 768, vertical sync. frequency range of 56-85 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
Appendix B: DVD Player Selection You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously.
(; 7 (; 7 (; 7 (; 7 (; 7 (; 7 (; 7 6 (; 7 &9%6 5* % &9%6 5*% <3 E3 U &9%6 69+ 6 +'0 , 3& 78 1 (5 2 2 2 2 2 2 2 2 2 1 2 (;7 ± 2 2 2 2 2 2 2 2 &9 % 6 2 3 , 3 (;7 ± 2 ; ; 2 2 2 2 2 2 3 5*% $ (;7 ± 2 2 2 2 2 2 2 2 &9 % 6 (;7 ± 2 2 2 ; ; 2 2 2 5*% (;7 ± ; ; ; ; ; ; ; ; < 3 E3 U (;7 ± 2 2 2 2 2 2 2 2 &9 % 6 2 3 , $ 6 9 $ ( , ; / 7 $ % / ( 2 ; 2 ,
QUICK GUIDE GB 32LD8600 IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation. insert the batteries into your handset Rear view either connect the aerial straight to your TV... Scart 1 Aerial (RF) Lead Scart 2 wall socket Aerial (RF) Socket ...or connect the aerial through a VCR...
GB ...or through a satellite decoder... TFT-LCD TV Aerial RF Lead from Satellite to TV • Scart Lead to EXT-1 on TV. TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ...or through a VCR and satellite decoder. TFT-LCD TV RF Lead from VCR to TV RF Lead from VCR to Satellite Aerial • Scart Lead to EXT-1 on TV. ANT.IN TV VCR RF Lead to Aerial Satellite LNB lead ANT.
GB connect the TV plug to the mains socket UK plug European plug Power Cord Power on/off Input button Plug the mains lead into the TV... insert plug... ...and switch on insert plug... switch your TV on by pressing the On/Off button NB: When the set is first switched on, the set will be in standby and the indicator on the front of the set will illuminate red. Press the channel up down (P- , P+) or numeric buttons (1, 2, 3, ...) to operate.
GB important note before starting Auto Setup If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. These measures ensure that all your external equipment is tuned in during the Auto Setup procedure. start A.P.S. (Auto Programming System) 1 First of all choose Language and Country by using 5 / 6 and 3 / 4 buttons.
UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi Television.
Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835694 Email: dmgservice.gr@hitachi-eu.