Manual

THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHi Color TV, the new remote control is designed to operate different types
of VCRs, CATV (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together n one area.
To operate your TV, point the remote control at the remote sensor of the TV and press the TV button. The remote will now control
your television.
To operate your VCR, point the remote at the remote sensor o[ the VCR and press the VCR button. The remote will now control
your VCR (See page 32 for instructions on how to program the remote to control your VCR).
To operate your cable/satellite box, point the remote at the remote sensor of the cable/satellite box and press the CABLE button.
The remote will now control your cable/satellite box, (See page 33 for instructions on how to program the remote to your
cable/satellite box).
These buttons allow the remote to control your
TV, VCR, or cable/satellite box depending
which mode is chosen, as explained above.
HELP PIP CH
00
PIP SWAP MOV£ FRZ
000
CD QD
QD C!DCi)
INPUT SLEEP
©G©
HITACHI
TV/VC R BUTTON
; remote is in the TV or VCR mode,
this is the TVNCR button. When the remote
is in the CABLE mode, this is the A/B button.
PRECODED VCR BUTTONS
buttons always transmit the chosen
precoded VCR codes.
LIGHT BUTTON (CLU-4111UI)
you are in a dark room, press the lght
button on the side of the remote to light up the
buttons shown, The light will stay on for about
8 seconds if the light button is not pressed
again. These buttons will not appear to light if
the room is too bright,
24