SOLID STATE COLOR TV OPERATING GUIDE IMPORTANT SAFEGUARDS _=1 S D 2-5 FIRST TIME USE 6-24 THE GENIUS REMOTE CONTROL 25-41 EASY GRAPHIC GUIDE 42 - 63 USEFUL INFORMATION INDEX 64-71
IMPORTANT _rnew HITACHI COLOR TV incorporatesa hostof featuresdesignedto give you excellentperformanceifyou follow instructionsin this manual. We recommendthat you read the followinginstructionsand "IMPORTANT SAFEa,RDS" noticebeforeturningon yourTV set for the firsttime. ow all warningsand instructionsmarked on this televisionreceiver.
SAFETY TIPS IMPORTANT SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI TELEVISION RECEIVER Our reputation has been built on the quality, performance, and ease SAFEGUARDS CAUTION: * Read all of these instructions * Save these instructions for later use. * Follow all warnings and instructions marked on the television receiver. of service of HITACHI television receivers. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS )TECTION AND LOCATION OF YOUR rides information with respect to pr(x_r grounding of the mast end supporting structure, grounding of SET the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis- If an outside antenna is connected to the television set, be sure the antanna system is grounded se as charge unit, connection to grounding electrode, and requirements for the grounding electrode.
PICTURE CAUTIONS WARNING Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to color television receivers. Such "PATTERN BURNS" constitute misuse and are NOT COVERED by your Hitachi Factory Warranty. When using the Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a "pattern burn" may develop over a long period of time.
ACCESSORIES :k to make sure you have the following accessories before disposing of the packing material. nformation regarding how to obtain these accessories, please call TOLL FREE 1-800-448-2244 for your nearest \CHI Authorized Parts Distributor in the continental United States. For Alaska and Hawaii, please contact you nearest \CHI Regional office PARTNAME .U-850GR REMOTE TRANSMITTER ILLUSTRATION PART NO. 2573971 .................. I ........ | sl oo¢ oo_ ooo 35UX60B IO0 .
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT Open the battery cover of the remote transmitter by pushing the notched part of the cover with your fingers. 1. . . 4. C°t Insert new =AA" size (SUM-3) batteries or equivalent for the Genius Remote. When replacing old batteries, push them towards the springs and lift them out. Matchthe (+) and (-) marksin the battery compartment. j Replace the cover. REAR CAUTIONS 1.
HOW TO SET UP YOUR NEW HITACHI COLOR TV ENNA _syourTV isconnectedtoa cableTV systemor to a centralizedantennasystem,a goodoutdoorcolorTV antenna :ommendedfor the bestperformance. However,if you are locatedin an exceptionallygood signalarea that isfree interferenceand multipleimage ghosts,an indoorantennamay be sufficient. ATION _tan area where sunlightor brightindoorilluminationwill not fall directlyon the picturescreen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components.
HOOK-UP rENNA CONNECTIONS CABLES AND CONNECTORS REAR OF TV Tooutdoor antenna TO REAR JACK PANEL or FOR 35UX60B : (75-Ohm) entenna/CATV(cable TV) .=nusinga 75-Ohm coaxialcable system,connectthe Joorantennaor CATV coaxialcable to the VHF/UHF )hm terminal. Ifyou have a secondantenna or cable ;ystem,connectthe coaxialcabletotheAUX terminal. _,dp oT°seb_ee ndsatntm enna To outdoor VHF or UHF antenna t -"(3O0-Ohm) antenna/UHF antenna .
FRONT PANEL CONTROLS FOR 35UX60B FRONT VIEW li I LII (_) AVX (Audio/Video) selector Press this button to select the current antenna source,or VIDEO: 1,2, or 3. Yourselectionisshown in the top rightcorner of the screen. (_ VOLUME level Press these buttonsfor your desired sound level. The volumelevelwillbedisplayedonthe TV screen.
3 FRONT PANEL CONTROLS FRONT VIEW _:-. m L,-,I_..._mM.q,_- r; 6 cT®6-® _ils are describedby the numberattachedto the part name.
FRONT PANEL CONTROLS (_) CHANNEL selector Pressthese buttonsuntilthe desiredchannel appearsin the top right comer of the TV screen. (_ POWER button Press this buttonto turnthe TV on or off. NOTE: Your HITACHI TV will appear to be turned =off" if there is no video input when VIDEO: 1,2, or 3 is selected. Press AVX untill it returns to the same Video, if not Power is "off".
FRONT PANEL JACKS AND CONNECTIONS frontpaneljacksare providedas a convenienceto allowyou to easilyconnecta camcorderor VCR as shownin the ,wingexamples: S-VHS Video camera Video camera OUTPUT OUTPUT Insertaudiocable intoleftchannel formonosound INPUT INPUT -o,.o y o, ...ov.o OOv. ? NOTE; Completelyinsertthe connectioncordplugswhenconnectingtofront paneljacks. Ifyou do not,the played backpicturemay be abnormal. Ifyou havean S-VHS VCR, usethe S-INPUT cable inplace ofthe standard videocable.
REAR PANEL JACKS FOR 35UX60B 35UX60B DOLBY SURROUND INT./EXT. SPEAKER ( ® ® @ TO CONVF.R'R_ AUX i @ Antenna Inputs/Output The "ANT" button on the Genius Remote Control allowsyou to switchbetweentwo separate 75-ohm RF antenna inputs,Main(VHF/UHF) andAuxiliary(AUX).The antennaoutputlabeled"To converter"allowsthe Main(VHF/UHF) antenna connectionto passdirectlyto a differentsourcesuch as a pay-TV cable decoder.
REAR PANEL JACKS 35TX10B REAR VIEW AUDIO to HI-FI OUTPUT TERMINALS INPUT TERMINALS AUDIO :INPUT TO Hi Fi iVIDEO 2 INPUT VIDEO © © AUDIO VHF/UHF VHF/UHF m --@ S-VIDEO O Q 1 ANTENNA AUDIO TERMINAL Q 16 AUDIO S-VIDEO INPUT Q
REAR PANEL CONNECTIONS FOR 35UX60B cable TVantenna coaxial cable Outside or _i$_ - See connections _ _---2-way signalsplitter on page 22. Surround Speakers j_ Optional, see tips ? I J/ J \_.onpage_ O O o O r--_-qr-_-3oo © O IIIIll IIIIll O O © Stereo System Amplifier '/ I"_----I r-_ VCR#2 Typical fullfeature set-up. Followconnectionsthat pertain to your personalentertainmentsystem. NOTE: The Dolby speakeroutputconnectionisfor DolbySurround.
REAR PANEL CONNECTIONS .__ FOR 35TX10B cable TVantenna coaxial cable Outside or splitter Optional, see tips on page 22. _=_°r..
EXTERNAL CONNECTIONS CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote transmitter, connect the system as shown below in Fig. 1. (Rear of Set) Audio To HI-FI Terminal TO AUDIO INPUT TERMINAL OF EXTERNAL AMPLIFIER EXTERNAL SPEAKER AUDIO AMPLIFIER EXTERNAL SPEAKER FIG.
CONNECTING EXTERNAL VIDEO SOURCES e exact arrangement you use to connect the Video Cassette Recorder, Video Disc Player and Video camera to your set is dependent on the model and features of each component. Check the Owner's Manual of each component for : location of its video and audio inputs and outputs. The following connection diagrams are offered as suggestions. wever, you may need to modify them to accommodate you particular assortment of components and features.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING STEREO VCR OR STEREO VIDEO DISC PLAYER Connectthe cable fromthe VIDEO OUT of the VCR or the Video Disc Player to the "INPUT (VIDEO)"jack on the TV set. (Fig. 1) 1. . . 4° 5. Connectthe cable from theAUDIO OUT "R" of the VCR of the VideoDisc Playerto the "INPUT(AUDIO)R)" jack. (Fig. 1) Connect the cable from the AUDIO OUT "L"of the VCR of the Video Disc Player to the "INPUT(AUDIO/L)" jack. (Fig.
REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B ,nect after turning the power of the "IV "OFF". ;s the RightSpeaker red buttonand insertthe positive(+)lead wire intothe hole belowthebutton.When The button leased,thewire islockedintoplace.Inthe same manner,pressthe RightSpeaker blackbuttonand insertthe negative ._adwire. Repeat this procedurefor the Left Speaker. DOLBY SPEAKERS i INT./EXT.
LI-r'r'r'r'r'r'r' AUDIO SYSTEM SET-UP FOR 35UX60B Matchthe numbersbelow to the diagram for speaker placementand refer to the table for the differentsurroundsound requirements.(See page 62 for SURROUND functions.) The television'sinternalspeakers. O These speakersare connectedto a separate audio amplifier.Use the "Audioto Hi-Fi"outputon the TV. (_) These speakers are connectedto the Rear Speaker 8 Ohm outputon the TV. 8"; ,8, %,..
AUDIO SYSTEM SET-UP FOR 35TX10B tch the numbers below to the diagram for speaker placement and refer to the table for the different surround sound luirements. (See page 61 for SURROUND functions.) ) The television's internal speakers. ) These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" output on the TV. II LR -° SURROUND FEATURE C STEREO SYSTEM AMPLIFIER "° REQUIRED CONNECTION OPTIONAL CONNECTION EFFECT OFF O (_ Receive Mono and Stereo Sound.
THE GENIUS REMOTE CONTROL (CLU-850GR) In additionto controllingall thefunctionson yourHITACHI ColorTV, the new GeniusRemote is designedto operate different types of VCR's and different types of CATV (Cable TV) converters with one touch. Basic operation keys are groupedtogether in one area. All othercontrols are separatedfrom them and arrangedin MULTI-PAGE sections, with a display that can be switched to cover any of the four pages.
MULTI-PAGE (_ POWER READY I P,NPI IEXC_II SH_I IFRE_ II ii II _T II _ POWER LEARN w_,ll ii iI I! II I IREC_-_ I<< L_RN II II !1 on II o II =.=. II n I I IsEUECTI I CURSOR SELECT SWITCH **0 c_ SELECT SWITCH 0 When "TV"is set When "VCR" is set _ POWER !i READY =. CURSOR MEMJ (_ WINDOWS II READY LEARN II II J .
THE GENIUS REMOTE CONTROL (CLU-692GR) andarrangedinMULTI-PAGE sections,witha displaythat canbe switchedto coveranyofthethree pages. Function are arranged and properly categorized into windows. Makingoperationsimpleevenwhen multiplefunctionsare to be controlled. In addition to controlling all the functions on your HITACHI Color TV, the Genius Remote control is designed to operate different types of VCR's (Also Abbreviated VTR) and different types of CATV converters (cable boxes) with one touch.
HOW TO USE THE GENIUS REMOTE TO CONTOL YOU TV Detailedexplanationof the circlednumbersis on the followingpages. 35UX6OB 35TX10B CLU4S0GR POWER READY CLU429GR LEARN POWER TV VTR MENU/CAW ........................................... --Q I II II II I I _T II II I IREc_. I mP mp Muun p/_GE ®®®1 MULTI pAGE ®®®1 O00 ®©® "_;_.......... _ ......i 0 0 0 GENIUS JUNIOR CL_R J HITACHI GENIUS REMOTE CLU-850GR 1_ 0etailed explanation of the circled numbers on the following pages.
HOW TO USE THE GENIUS REMOTE TO CONTROL button @ POWER Press this button to turn the TV set on or off YOUR TV If an automatic message is set, it will be displayed when the TV is first turned on. (See page 53.) RECALL button When you want to check the channel being received, or if it has a stereo (ST) or second audio program (SAP), press the RECALL button. You can also checkthe time, and ifthe ON TIME or OFF TIME has been set. (See page 52.
__ HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV ANT button (35UX60B only) Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary) antenna inputs. NOTE: When VHF/UHF is selected, the channel number in the upper right corner of the screen is in green. When I the AUX input is selected, the channel number is in yellow. I t MENU, ENTER, CURSOR buttons All the on-screen display features can be set or adjusted by using these buttons.
HOW TO USE THE GENIUS Q VOLUME, MUTE buttons Press the "VOLUME" up ( • ) or down ( • REMOTE TO CONTROL YOUR TV ) button until you obtain the desired sound level. To turn the sound off instantly to answer the telephone, etc.. press the "MUTE" button. Press the "MUTE" button again or press the =VOLUME" up ( • ) button to restore the sound. .TV STEkEO =8 Louder > VOLUME IlfllflllllHIIIIIImllll.,...,-......., The word"MUTE" will remaindisplayedif the CLOSED CAPTION feature is turned off.
PICTURE-IN-PICTURE (P-IN-P) Picture-in-Picturefeature isconvenientwhen you wantto watchmore than one programat the same time. can watcha TV programwhileviewinga VCR program(TV or tape) on any of the video inputs,and viceversa with feature. Frontor backof TV I II II II I [I,++,_+- | ,_ II II IIR'o_I 9?? hck_ _ P-IN-P BuTroN (35TX10B) Pressthe "P IN P"buttonand a sub-pictureappears in one comer of the screen. Pressthe buttona secondtime to removethe sub-picturefromthe screen.
PICTURE-IN-PICTURE Q (P-IN-P) SHIFT BUTTON To movethe sub-pictureto anothercorner, press the "SHIFT"button.The sub-picturemoves one step counterclockwiseeverytime the "SHIFT" buttonis pressed. ® FREEZE Bul"rON If you wish to freeze the sub-picture,press "FREEZE" button. This is convenientwhen tryingto write down the addressfora mailordercompany,recordingstatisticsfor a sportingevent,etc. To returnto motion,pressthebutton again.
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS erating the pre-Coded function for your VCR s GeniusRemote isdesignedto operatedifferenttypesofVCRs. You mustfirstprogramthe GeniusRemoteto match , remote system in yourVCR. (Refer to Table 1 on page 36 or Table 3 on page 37.) Set the MULTI-PAGE select switchto "VCR." Set the USE/LEARN mode select switch on the rear side of the Genius Remote to "USE." (For CLU-850GR only) Turn ON your VCR. Aim the Genius Remote controlat the front of yourVCR.
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the pre-coded function for your cable box This Genius Remote is designedto operatedifferenttypesof cable boxes.You mustfirstprogramthe Genius Remote to matchthe remote system in yourcable box. (Refer to Table 2 on page 36 or Table 4 on page 37.) 1. Set the MULTI-PAGE select switchto "CAW." 2. Set the USE/LEARN mode selectswitchto "USE."(For CLU-850GR only) 3. Turn ON yourcable box. 4.
VCR AND CABLE BOX CODES BLE 1.
VCR AND CABLE BOX CODES TABLE 3. VCR Precoded VCR BRAND Canon Citizen remote controls for Hitachi GJ111 Remote CLU-692GR.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR Before starting the memory operation _eGenius Remote is equipped with a learning function lich allows it to learn additional infrared control codes. _isremote will not only control the television, a VCR, and cable box, but also other electronic equipment which ;es an infrared remote transmitter, by learning the _nsmitter's codes. Since the infraredsignalssent from the remotetransmitter may be reflectedby a wall, door, etc.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR Storlng Operation ® Set the remote transmitter as shown below. Put the remote transmitter which contains the codes to be stored and the GENIUS REMOTE transmitter toface each other. (Distance should be 2-4 inches.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR READY LEARN (Goes out) (Lights) READY When storinghas been performedcorrectly,the LEARN indicatorlightsfor about 2 seconds. Ifthe storingwas notdone correctly,or the codesare too longto learn, or no more codescan be storedin memory dueto memoryoverflow,the LEARNindicatorandREADY indicatorwill flash on and off.
USING THE REMOTE TO LEARN ADDITIONAL FUNCTIONS NOTE: 1. To operateyourTV, be sureto pointthe GeniusRemoteat the remote sensoron thetelevision.To operateother electronicequipmentlike a VCR, point the remote at the sensoron the device. 2. Refer to the instructionmanualof the VCR for operationon the buttonsexclusivelyfor the VCR. 3. Be sure to keep the originalremote transmittereven after storingitscodes in the Genius Remote Control. 4.
EASY GRAPHIC GUIDF PressMENU onthe remotecontroltodisplaythe differentfeatureson yourHITACHI TV. The featureto be selected will be highlightedin a magenta (purple)color. ) Press the CURSOR buttons to highlight a different feature. I Press ENTER on the remote control to select a feature. NOTE: MENU CURSOR Press the CURSOR buttons first to view FAVORITE CHANNELS (See Page 47.) I VIDEO PROGRAM This part of the screen shows what selections are available.
EASY GRAPHIC GUIDE SET UP I AIR/CABLE AIR I or Select cableantenna TV. IAUTO PROGRAM I CHANNEL MEMORY I Channel buttons, I CLOSED add or erase. CAPTION First time setup forchannelbuttons. I dialogue/text. Feature to display RESET Return video and audio adjustmentsto factory settings. PROGRAM ICHANNEL CAPTION IPROGRAM LIST CLOCK I CLOCK IAUTOMATIC MESSAGE-1 I Check channel name, scan, childlock. ICHILD LOCK Block picture channel & sound. IVOLUME CORRECTION Lowervolume on selectedchannels.
SET UP Select SET UP when setting your TV up for the first time. Use the CURSOR UP/DOWN buttons on the remote to highlight the function desired. CURSOR C2 -NU I"£1r',E R <1_ dR/CABLE AIR ENTER (SET) CURSOR I,PR_ O ENTER (SET) MENU (EXIT) AIR/CABLE I'£1r E ER MENU (EXIT) • MENU (EXIT) • Select AIR ifyou are usingan indooror outdoorantenna. Select CATV if you have cable "IV. Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit.
SET UP Thisfeature willautomaticallystoreactiveTV channelsin CHANNEL MEMORY. This willallowyou I to skip over unused channelswhen usingthe CHANNEL UP (•) or DOWN ( • ) buttons. AUTO PROGRAM 1" O A R pROGRAM CURSOR I CHANNEL CLOSED I_APTION ,_ ENTER (SET) 05 ENTER NOW AUTOPROGRAM IS IN PROGRESS AUTOPROGRAM PRESS ENTER TO BEGIN MENU (EXIT) MENU (EXIT) I After Operation If the MENU buttonis pressedwhilethe auto programmingfunctionisengaged, programmingwillstop.
SET UP LOSED APTION videowhicharedisplayedon theTV screen.YourlocalTV programguidedenotestheseprograms I Closedcaptionsare the dialogue,narration,and/orsoundeffectsof a televisionprogramor home as i'_'1or _. CURSOR AIR/CABLE A R AUTO PROGRAM I D ,.NOL MEMORY CLOSED CAPTION DISPLAY :ON OFF MODE :C.C. TEXT CHANNEL : 1 2 ENTER I I ENTER (SET) [_ MENU (EXIT) MENU (EXIT) le selected function will be in magenta. Your choicefor the function will be in blue.
F, VORTO C,,NNOLS i;' the FAVORITE CHANNELS function will allow you to select up to 16 favorite channels by pressing the cursor buttons. 35 CURSOR CHANNEL "r"--i _ r_l 35 r_l ENTER C) / | I ACTION / _ 3s r'--lr-"'ll'_l _ r_l r--i r---1 r'-"l r'-'l Iz23 E2_ I _ r--_ E223r--'l NEXT CHANNEL:CH4k .,,_ ENTER CHV MENU | ACTION | NEXT CHANNEL:CH& I ..=4k ENTER CH • MENU _" (EXIT) I _=" (EXIT) (SET) (SET) Jse the CHANNEL • ,V or number buttons to select one of your favorite channels.
RESET RE-SET- Use the resetto changeyourpreferredvideo and audioadjustmentsto factorysettings. CURSOR CURSOR ._ I'_1r_E,,_R ENTER (SET)" MENU (EXIT) )r 35UX60B PRESS ENTER TO RETURN VIDEO ..ANDAUDIO ,_; TO FACTORY SEI-rlNGS ENTER MENU (EXIT) FactorySettings: VIDEO AUDIO Contrast: Color: Tint: Brightness: Sharpness: AI: Auto Color: Noise Reducer: White Control: lilmMHimflmBIii m.,m_m..m mmim,bmm.
PROGRAM This Selection contains advanced feature switch will make TV viewing easier and more enjoyable. CURSOR CURSOR ICHANNEL O ENTERS1 --) I I CHILD I I LOCK _, PROGRAM LIST ENTER (SET) CHANNEL CAPTION _'_ MENU (EXIT) _lb IVOLUME [CORRECTION ENTER (SET) MENU (EXIT) l Use this feature to give channel names to up to 30 channels for each antenna source.
,j PROGRAM Thisfunctionwill blockout the pictureand soundof the selectedchannel. :HILD OCK I [] CHANNEL CAPTION PROGRAM LIST _Jb CHILD LOCK CHILD SET ENTER IVOLUME ICORRECTION ENTER (SET) CHILD LOCK 41 LOCK IKEY NUMBER I J _CHANGE J NEXT CHANNEL:CHA KEY NUMBER:0-9 MENU (EXIT) <1_ ENTER (SET) CHV MENU (EXIT) le code to set or cancel CHILD LOCK is a three digit key number. The factory preset key number is 000.
PROGRAM Use this functionto reducethe volumelevel of up to fourTV channelsthat soundloudcompared CORRECTION VOLUME I to otherTV channels. [] 22 18 CHANNEL (_APTION CHILD LOCK PROGRAM [VOLUME LIST ICORRECTION CH LEVEL 100% 100% 100% 100% ENTER CHANNEL NEXT CHANNEL:CH& ENTER (SET) MENU (EXIT) €11_ • NTER (SET) LEVEL 100% 100% I00% I00% NEXT CHANNEL:CHak CHV ¢1_ MENU (EXIT) ENTER (SET) CHV MENU (EXIT) Pressthe cursorA ,V to select one of the fourvolume corrections.
,q CLOCK .?,LOCK Use this feature for all time related functions. D LOCK ET I orhe automatic time must message. be set before you can use the on/off timer CURSOR IE ] CURSOR ENTER _sI _11 r'_ _ rv _.
CLOCK I AUTOMATIC MESSAGE J Use this function to set one or two personal messages every day or one time only. [] CLOCK SET MESSAGE-1 .teott **.oto=lt **e... ote*eelt oeQeoo****oo° ON/OFF TIMER ENTER --->O---> MESSAGE-I DO YOUR HOMEWORK OR I WILL USE CHILDLOCK (CANCEL) (CANCEL) PLEASE CLOCK SET AT THE FIRST TIME ,_ ENTER (SET) MENU (EXIT) Use the CURSOR • ENTER (SET) MENU (EXIT) ENTER (SET) MENU (EXIT) ,V to select a letter or other character. Use the CURSOR 4, • to change position.
VIDEO FOR 35UX60R Select VIDEO to adjustpicturesettings,and to improvepicturequality. VIDEO ENTiERA ,_ 'REFERENCE ,DJUST [] CURSOR CURSOR ENTER (SET) r_ , "RE'ERENC"N. • r_ ,_ MENU (EXIT) ENTER (SET) MENU (EXIT) Use this feature to adjustcontrast,color, etc. pREFERENCEI lAD JUST pREFERENCE_ I ISETFING / ENTER (SET) ENTER -_O-_ CONTRAST COLOR TINT BRIGHT SHARPNESS: RESET - ; :::::::::::::: -.............|..
VIDEO FOR 35UX60B I picture our HITACHI settings TV to produce has an the AI (Artificial highest quality Intelligence) picture function possible. which will automatically adjust When AI is magenta, use the cursor
VIDEO FOR 35TX10B VIDEO Select VIDEO to adjustpicturesettings,and to improvepicturequality. CURSOR ENTER -->O ,_ ENTER (SET) MENU (EXIT) se this feature to adjust contrast, color, tint, brightness, sharpness, and white control. .--.) CONTRAST COLOR TINT IIII BRIGHT J SHARPNESS WHITE CONTROL ON RESET <1_ ENTER (SET) :, I : I :::: OFF MENU (EXIT) ressthe CURSOR buttonsto selectand make adjustments. he functionto be adjustedwillbe in magenta.
AUDIO Select AUDIO to adjustthe TV to your preference,to improvethe sound quality,and to selectspecialsound effects. AUDIO MENU'fl [] CURSOR CURSOR ENTERflI_ I_ _I_EFERENCIEI I_ UST / I <1_ I ADJUSTMENT PREFERENCE ENTER (SET) I$EI"I'ING/ SURROUND ..,&= 'i 'q_ MENU (EXIT) pREFERENCEI ENTER (SET) I MENU (EXIT) II Use this to set balance, bass, and treble.
AUDIO =_FERENCE Use Preference conditions. I-I'ING SETTING to improve the sound performance of your TV depending on listening [] REFERENCEI JUST l IPREFERENCEI ISETTING | I SURROUND ENTER --> C)----> I ENTER (SET) MTS:MONO SAP DYNAMIC BASS: LOUDNESS: INT. SPEAKERS: ENTER (SET) MENU (EXIT) STEREO ON OFF ON OFF ON OFF MENU (EXIT) the CURSOR •,Vto selecta function. The function willbe in magenta. the CURSOR _1, • to change function. Yourchoicewill be in blue.
AUDIO INT. SPEAKERS This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate stereo system. This feature is used to turn the internal speakers "ON" or "OFF", when the Receiver is connected to an External Audio Amplifier. This function allow the user to tum offthe TV speakers. Therefore, no sound will be emitted from them.
AUDIO ) OnScreen Display Int.Speaker: "OFF"-andRear Switch Int. or Ext.: Int. or Ext. Speaker are "OFF" * DOLBY SURROUND 8 _ ONLY MTS:MONO SAP STEREO DYNAMIC BASS.ON OFF LOUDNESS: ON OFF INT.SPEAKERS: ON OFF 4_ EN_rER (SET) INT.IEXT. SPEAKERS MENU (EXIT) When switch to InL, "built in" speaker is "OFF". * Dolby surround for 35UX60B is always "ON'. * DOLBY SURROUND INT.IEXT. SPEAKERS R $ _ ONLY MTS:MONO SAP STEREO DYNAMIC BASS@N OFF LOUDNESS: ON OFF INT.
AUDIO FOR 35TX10B ISURROUND movietheaters,etc. when you set up yourspeaker shown in the hear sectionon rear I halls, he followingsurroundsoundsettingswill reproducethesystemas =live"sound you would in concert panel connectionson page 18 and 24. The surroundsoundsystem ismosteffectivewithmovies played on a stereo VCR. Surroundsoundallowstheviewertoenjoysoundwhichprovidesa feeling of"presence"fromstereo broadcastsand VCR tapes* recordedwithstereosound.
AUDIO FOR 35UX60B URROUND sportsstadiums,movietheaters,etc. when you set up yourspeakersystemas shown in the I halls, The followingsurroundsoundsettingswill reproducethe =live"sound you would hear in concert sectionon rear panelconnectionson page 17 and 23. The Surroundsoundsystemismosteffective withmoviesand otherstereomaterialthatis DolbySurroundencoded,and playedon a stereoVCR.
AUDIO FOR 35UX60B ' DOLBY SURROUND* This is effective when playing a video tape marked with I][1t =°ur_=usmuml logo. You can enjoy the feeling of a movie theater in your home. *Dolby and the double-D symbol are trademark of Dolby Laboratories Licensing Corporation. CURSOR SURROUND _i-_---_ax 1 I DOL.
CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL DO Dustthe screen and cabinetwitha softcloth. Cleanthe screenwith a softclothmoistenedin warmwater. Dry witha softcloth.(A mildsoap may be usedif the screen is extremelydirty.) Place yourTV and remotecontrolaway from extreme heat, humidityand extremely dustyplaces. Remove the plugfrom the wall outletifyourtelevisionset willnot be used for a long periodof time, for instance, when you go on vacation.
RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
CHECK SYMPTOMS HERE BEFORE CALLING FOR SERVICE __' No picture, no sound • • OK,picturepoor Sound Picture • Picture Lines • • • OK, sound poor or streaks blurred in picture Poor reception on some channels No color R 35UX60B his Color Television incorporatesadvanced power surge protection technology designed to protect against _mponent or circuitdamage due to externalor internalvoltageor powersurges.
SPECIFICATIONS Features: • SuperfinePictureQuality 750 Line HorizontalResolution(35UX60B) 700 Line HorizontalResolution(35TX10B) • Dark Tint Tube, INVAR Mask (35UX60B), AK Mask (35TX10B) • Genius Remote cLu-850GR (35UX60B) and CLU-692GR (35TX10B) Controlsmany VCR brandsand cable boxes, and otheraudio/videoequipment • ICON: Easy GraphicGuide • Full set of InputJacks, includingS-Video • ArtificialIntelligenceSystem (35UX60B) • Closed CaptionDecoder • Advance high resolutionPicturein Picture(35UX60B), Picturei
NOTES 68
HITACHI To locate an authorized HITACHI service in the continental facility U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day 1-800-448-2244 Hitachi Home Electronics (America), Inc. Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each lacility will provide you with convenient and expedient assIstance.
INDEX ._ssories........................ 6 \rtificial Intelligence)............... 13, 55 button..................... 29, 30 ,nna.................. 8, 10, 15, 30, 44 o PreferenceAdjust.................. 57 PreferenceSetting.................. 58 Surround................ 23, 24, 61,62 oto Hi-Fi ............... 15, 16, 17, 18, 19 o System Set-Up ............... 23, 24 ...................... 11,15,30,32 _=ryReplacement............... 7, 41,64 le BoxCodes ................. 35, 36, 37 les, Hookup .................
HITACHI QR00611
