Manual

REAR PANEL JACKS FOR 35UX60B

35UX60B

@ TO CONVF.R'R_

AUX

DOLBY SURROUND

(

INT./EXT. SPEAKER

Antenna Inputs/Output

The "ANT" button onthe Genius RemoteControl allowsyoutoswitchbetweentwoseparate75-ohm RF antenna

inputs,Main(VHF/UHF) andAuxiliary(AUX).The antennaoutputlabeled"Toconverter"allowsthe Main(VHF/UHF)

antennaconnectiontopassdirectlytoa differentsourcesuchas a pay-TV cabledecoder.

Audio/Video Inputs 1, 2

The "AVX" (Auxiliary video) button will step through each video source and the current antenna input each time it

is pressed. Use the audio and video inputs to connect external devices, such as VCR's, camcorders, laser disc

players, video games, etc.

Output

These jacks provide fixed audio and video signals which are used for recording.

Audio to Hi-Fi

These jacks provide variable audio output to a separate stereo system amplifier. With this connection, the audio to

the stereo can be controlled by the television's remote control. Use these jacks for the SURROUND Left and Right

channels. (See page 19, 23 and 24.)

Rear Speaker Terminals

These terminals are used to connect external speakers, which are used for the surround sound feature. The volume

level iscontrolled by the remote control main volume buttons and also by an independent rear volume feature found

in the "sound" function menu. Use speakers with 8 Ohm impedance only. Terminals are Dolby external speaker and

switchable Internal/External Speakers.

S-Video

Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.

NOTE: Model 35TX10B has only one antenna input, no external speaker output connection and no AudioNideo

output jacks.

NOTE: DOLBY SURROUND SPEAKER connection is used for Dolby surround. There is always a signal coming

out from this connection.

INT/EXT SPEAKER connection is connected in parallel with the factory built in speaker. By using an

optional external speaker, you can select to use which speaker you want by switching the switch located

at the rear panel to (INT) Internal for Factory built in speaker or (EXT) External for optional consumer

connected speakers, this is On Screen Display controlled either"ON" or "OFF"