TABLE OF CONTENTS 1 HITACHI SOLID STATE COLOR TELEVISION 35UX60B 35TX10B OPERATING GUIDE 1
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................ 2 IMPORTANT.............................................................................................................................................. 4 SAFETY TIPS............................................................................................................................................. 6 PICTURE CAUTIONS ...
TABLE OF CONTENTS CHANNEL MEMORY......................................................................................................................... 63 CLOSED CAPTION ........................................................................................................................... 63 FAVORITE CHANNELS......................................................................................................................... 65 RESET.................................................................
IMPORTANT IMPORTANT Your new HITACHI COLOR TV incorporates a host of features designed to give you excellent performance if you follow the instructions in this manual. We recommend that you read the following instructions and "IMPORTANT SAFEGUARDS" notice before turning on your TV set for the first time. Follow all warnings and instructions marked on this television receiver. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT TO PREVENT ELECTRIC SHOCK, DO NOT USE THE TELEVISION'S PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES AND GROUND TERMINAL CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NEVER CONNECT THE TV TO 50 Hz, DIRECT CURRENT, OR ANYTHING OTHER THAN THE SPECIFIED VOLTAGE. NOTE: This television receiver will display television closed captioning ( accordance with paragraph 15, 119 of the FCC rules.
SAFETY TIPS SAFETY TIPS IMPORTANT SAFEGUARDS SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI TELEVISION RECEIVER CAUTION: • Read all of these instructions. • Save these instructions for later use. • Follow all warnings and instructions marked on the television receiver. Our reputation has been built on the quality, performance, and ease of service of HITACHI television receivers. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS 4 Do not allow anything to rest on or roll over the power cord, and do not place the TV where the power cord is subject to traffic or abuse. This may result in a shock or fire hazard. 5 Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
SAFETY TIPS 11-1 Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer. 11-2 An appliance and cart combination should be moved with care.
SAFETY TIPS • Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc. • Never place the set near or over a radiator or heat register. • Never place the set in a "built-in" enclosure, unless proper ventilation provided. PROTECTION AND LOCATION OF YOUR SET 16-1 If an outside antenna is connected to the television set, be sure the antenna system is protected against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
SAFETY TIPS OPERATION OF YOUR SET 19 This television set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply at your home, consult your television dealer or local power company. For television sets designed to operate from battery power, refer to the operating instructions.
SAFETY TIPS FOR SERVICING AND MODIFICATION 25 Do not use attachments not recommended by the television set manufacturer as they may cause hazards. 26 When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
PICTURE CAUTIONS PICTURE CAUTIONS WARNING Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to color television receivers. Such "PATTERN BURNS" constitute misuse and are NOT COVERED by your Hitachi Factory Warranty.
ACCESSORIES ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. For information regarding how to obtain these accessories, please call TOLL FREE 1800-448-2244 for your nearest HITACHI Authorized Parts Distributor in the continental United States.
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1. Open the battery cover of the remote transmitter by pushing the notched part of the cover with your fingers. 2. Insert new "AA" size (SUM-3) batteries or equivalent for the Genius Remote. When replacing old batteries, push them towards the springs and lift them out. 3. Match the (+) and (-) marks in the battery compartment. 4. Replace the cover. CAUTIONS 1.
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 3. To operate your TV, point the Remote transmitter at the remote sensor of the TV.
HOW TO SET UP YOUR NEW HITACHI COLOR TV HOW TO SET UP YOUR NEW HITACHI COLOR TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for the best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient.
HOW TO SET UP YOUR NEW HITACHI COLOR TV CAUTION: The magnetic field of external speakers may cause the TV picture to distort if the speakers are placed too close to the television. Move the speakers away from the TV until there is no picture distortion.
HOOK-UP CABLES AND CONNECTORS HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components.
HOOK-UP CABLES AND CONNECTORS ANTENNA CONNECTIONS TO REAR JACK PANEL FOR 35UX60B VHF (75-Ohm) antenna/CATV(cable TV) When using a 75-Ohm coaxial cable system, connect the outdoor antenna or CATV coaxial cable to the VHF/UHF 75-Ohm terminal. If you have a second antenna or cable TV system, connect the coaxial cable to the AUX terminal.
HOOK-UP CABLES AND CONNECTORS receptacle 2. VHF (300-Ohm) antenna/UHF antenna When using a 300-Ohm twin lead from an outdoor antenna, disconnect the (VHF or UHF) indoor antenna leads from screws of the (VHF or UHF) adapter, and connect outdoor (VHF or UHF) antenna leads to these screws of a (VHF or UHF) adapter. 3. When both VHF and UHF antennas are connected Attach an optional ANT. MIXER to the TV antenna terminal, and connect the cables to the ANT. MIXER. Notes: 1.
FRONT PANEL CONTROLS FOR 35UX60B FRONT PANEL CONTROLS FOR 35UX60B Front View Illustration AVX (Audio/Video) selector Press this button to select the current antenna source, or VIDEO: 1, 2 or 3. Your selection is shown in the top right corner of the screen. VOLUME level Press these buttons for your desired sound level. The volume level will be displayed on the TV screen.
FRONT PANEL CONTROLS FOR 35TX10B FRONT PANEL CONTROLS FOR 35TX10B Front View Illustration Details are described by the number attached to the part name. (example: ) CHANNEL selector Press these buttons until the desired channel appears in the top right corner of the TV screen. POWER button Press this button to turn the TV on or off. NOTE: Your HITACHI TV will appear to be turned "OFF" If there is no video input when VIDEO: 1, 2 or 3 is selected.
FRONT PANEL JACKS AND CONNECTIONS FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: Front Panel Jacks Examples NOTE: Completely insert the connections cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
REAR PANEL JACKS FOR 35UX60B REAR PANEL JACKS FOR 35UX60B Rear Panel Jacks - 35UX60B Antenna Inputs/Output The "ANT" button on the Genius Remote Control allows you to switch between two separate 75-ohm RF antenna inputs, Main (VHF/UHF) and Auxiliary (AUX). The antenna output labeled "To converter" allows the Main (VHF/UHF) antenna connection to pass directly to a different source such as a pay-TV cable decoder.
REAR PANEL JACKS FOR 35UX60B NOTE: Model 35TX10B has only one antenna input, no external speaker output connection and no Audio/Video output jacks. NOTE: DOLBY SURROUND SPEAKER connection is used for Dolby surround. There is always a signal coming out from this connection. INT/EXT SPEAKER connection is connected in parallel with the factory built in speaker.
REAR PANEL JACKS 35TX10B REAR PANEL JACKS 35TX10B Rear Panel Jacks - 35TX10B 26
REAR PANEL CONNECTIONS FOR 35UX60B REAR PANEL CONNECTIONS FOR 35UX60B Rear Panel Connections - 35UX60B Typical full feature set-up. Follow connections that pertain to your personal entertainment system. NOTE: The Dolby speaker output connection is for Dolby Surround. This is always "ON" wether the Int/Ext Speaker output is "ON" or "OFF". The Int/Ext Speaker output will only have a sound reproduction when switch is on "EXT" and Int.
REAR PANEL CONNECTIONS FOR 35TX10B REAR PANEL CONNECTIONS FOR 35TX10B Rear Panel Connections - 35TX10B 28
EXTERNAL CONNECTIONS EXTERNAL CONNECTIONS CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote transmitter, connect the system as shown below in Fig. 1 FIG. 1 NOTE: To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound level using the volume control on the remote transmitter of the TV set.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the Video Cassette Recorder, Video Disc Player and Video Camera to your TV set is dependent on the model and features of each component. Check the Owner's Manual of each component for the location of its video and audio inputs and outputs. The following connection diagrams are offered as suggestions.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING STEREO VCR OR STEREO VIDEO DISC PLAYER 1. Connect the cable from the VIDEO OUT of the VCR or the Video Disc Player to the "INPUT (VIDEO)" jack on the TV set. (Fig. 1) 2. Connect the cable from the AUDIO OUT "R" of the VCR or the Video Disc Player to the "INPUT (AUDIO)R)" jack. (Fig.1) 3. Connect the cable from the AUDIO OUT "L" of the VCR of the Video Disc Player to the "INPUT (AUDIO/L)" jack. (Fig.1) 4.
CONNECTING EXTERNAL VIDEO SOURCES NOTE: Completely insert the connection cord plugs when connecting to REAR panel jacks. If you do not the played back picture may be abnormal. If you have an S-VHS VCR, use the S INPUT cable in place of the standard video cable.
REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B Connect after turning the power to the TV "OFF". Press the Right Speaker red button and insert the positive (+) lead wire into the hole below the button. When The button is released, the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker. A.
REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B 34
REAR SPEAKER TERMINAL CONNECTIONS FOR 35UX60B TIPS ON REAR PANEL CONNECTIONS The S-Video connection is provided for high performance laser discs, VCR's, etc., that have this feature. Use this connection in place of the standard video connection if your device has this feature. If your device has only one audio output (mono sound), connect it to the left audio jack on the TV. Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
AUDIO SYSTEM SET-UP FOR 35UX60B AUDIO SYSTEM SET-UP FOR 35UX60B Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements. (See page 62 for SURROUND functions.) The television's internal speakers. These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" output on the TV. These speakers are connected to the Rear Speaker 8 Ohm output on the TV.
AUDIO SYSTEM SET-UP FOR 35TX10B AUDIO SYSTEM SET-UP FOR 35TX10B Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements. (See page 61 for SURROUND functions.) The television's internal speakers. These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" output on the TV.
THE GENIUS REMOTE CONTROL (CLU-850GR) THE GENIUS REMOTE CONTROL (CLU-850GR) In addition to controlling all the functions on your HITACHI Color TV, the new Genius Remote is designed to operate different types of VCR's and different types of CATV (Cable TV) converters with one touch. Basic operation keys are grouped together in one area. All other controls are separated from them and arranged in MULTI-PAGE sections, with a display that can be switched to cover any of the four pages.
THE GENIUS REMOTE CONTROL (CLU-850GR) buttons shown in . The light will stay on for about 8 seconds if no button is pressed. The buttons will not appear to light if the room is too bright.
MULTI-PAGE WINDOWS MULTI-PAGE WINDOWS Click to see Multi-Page Windows of CLU-850GR 40
THE GENIUS REMOTE CONTROL (CLU-692GR) THE GENIUS REMOTE CONTROL (CLU-692GR) In addition to controlling all the functions on your HITACHI Color TV, the Genius Remote Control is designed to operate different types of VCR's (Also Abbreviated VTR) and different types of CATV converters (cable boxes) with one touch. Basic operating buttons are grouped together in one area.
THE GENIUS REMOTE CONTROL (CLU-692GR) These buttons will control a VCR or a cable box when the Multi-Page select switch is in the VCR of MENU/CATV position. LIGHT BUTTON When you are in a dark room, press this button on to light up the Channel Keys, Volume, Up and Down Keys. The light will stay on for about 8 seconds if no button is pressed. The buttons will not appear to light if the room is too bright.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV Detailed explanation of the circled numbers is on the following pages. Click here to see the CLU-850GR Click here to see the CLU-692GR POWER button Press this button to turn the TV set on or off. If an automatic message is set, it will be displayed when the TV is first turned on. (See page 53.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV Click here for another picture of CLU-850GR ANT button (35UX60B only) Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary) antenna inputs. NOTE: When VHF/UHF is selected, the channel number in the upper right corner of the screen is in green. When the AUX input is selected, the channel number is in yellow. MENU, ENTER, CURSOR buttons All the on-screen display features can be set or adjusted by using these buttons.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV VOLUME, MUTE buttons Press the "VOLUME" up ( ) or down ( level. ) button until you obtain the desired sound To turn the sound OFF instantly to answer the telephone, etc., press the "MUTE" button. Press the "MUTE" button again or press the "VOLUME" up ( ) button to restore the sound. The word "MUTE" will remain displayed if the CLOSED CAPTION feature is turned OFF. The word "MUTE" will not be displayed if the CLOSED CAPTION feature is ON.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV LAST CHANNEL (LST-CH) button Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.) PICTURE-IN-PICTURE buttons See separate section on page 32 for a description. LIGHT button When you are in a dark room, press this button to light up the volume and channel buttons. The light will stay ON for about 8 seconds if no buttons is pressed. The buttons will not appear to light if the room is too bright.
PICTURE-IN-PICTURE (P-IN-P) PICTURE-IN-PICTURE (P-IN-P) 2 The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program while viewing a VCR program (TV or tape) on any of the video inputs, and vice versa with this feature. Picture in Picture Hookup and Remote Buttons P-IN-P BUTTON (35TX10B) Press the "P IN P" button and a sub-picture appears in one corner of the screen.
PICTURE-IN-PICTURE (P-IN-P) SHIFT BUTTON To move the sub-picture to another corner, press the "SHIFT" button. The sub-picture moves one step counter-clockwise every time the "SHIFT" button is pressed. FREEZE BUTTON If you wish to freeze the sub-picture, press "FREEZE" button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return to motion, press the button again.
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS Operating the pre-Coded function for your VCR This Genius Remote is designed to operate different types of VCRs. You must first program the Genius Remote to match the remote system in your VCR. (Refer to Table 1 on page 36 or Table 3 on page 37.) 1. Set the MULTI-PAGE select switch to "VCR". 2. Set the USE/LEARN mode select switch on the rear side of the Genius Remote to "USE." (For CLU-850GR only) 3.
USING THE GENIUS REMOTE TO CONTROL VCR FUNCTIONS EXCLUSIVE TV BUTTONS These buttons are for operating the TV.
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the pre-coded function for your Cable Box This Genius Remote is designed to operate different types of cable boxes. You must first program the Genius Remote to match the remote system in your cable box. (Refer to Table 2 on page 36 or Table 4 on page 37.) 1. Set the MULTI-PAGE select switch to "CATV". 2. Set the USE/LEARN mode select switch to "USE." (For CLU-850GR only) 3.
VCR AND CABLE BOX CODES VCR AND CABLE BOX CODES TABLE 1. VCR Precoded remote controls for Hitachi GR111 Remote CLU-850GR.
VCR AND CABLE BOX CODES Scott Sears Sharp Sony Sylvania Tashiko Technics Toshiba Vector Research Video Concepts Wards Yamaha Zenith 7/8 1/9 CHANNEL 5 / MUTE / AVX 4/6 0 6 1/8 VOLUME VOLUME CHANNEL 0 / VOLUME 3/5 TABLE 2. Cable Box Precoded remote controls for Hitachi GR111 Remote CLU850GR. Press SELECT and this CATV brand button General Instrument 0/1/2/3 Hamlin 4 Jerrold 1/2/3/3 Magnavox 9 Panasonic 8 Philips 9 Pioneer 7 Regal 4 Scientific Atlantic 6 Viewstar 9 Zenith 5 TABLE 3.
VCR AND CABLE BOX CODES Instant Replay JC Penny JVC Kenwood Magnavox Marantz Marta Memorex MGA Minolta Mitsubishi Montgomery Wards NEC Panasonic Pentex Philco Philips Pioneer ProScan Quasar RCA Realistic Sanyo Scott Sears Sharp Sony Sylvania Tashiko Technics Toshiba Wards Yamaha Zenith 6 1/6/9 0 0 4/6 9 0 6 7 1 7 CHANNEL 9 6 1 4/6 4/6 1 2 6 1/2 6 / 9 / CHANNEL 9 7/8 1/9 CHANNEL 5 / VOLUME / VOLUME 4/6 0 6 1/8 CHANNEL 9 3/5 54
VCR AND CABLE BOX CODES TABLE 4. Cable Box Precoded remote controls for Hitachi GJ111 Remote CLU692GR.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR The Genius Remote is equipped with a learning function which allows it to learn additional infrared control codes. This remote will not only control the television, a VCR, and a cable box, but also other electronic equipment which uses an infrared remote transmitter, by learning the transmitter's codes. Only infrared remote control codes can be stored in memory.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR Set the LEARN/USE mode select switch located on the back of the Genius Remote to the LEARN position. Set the MULTI-PAGE select switch to "USER" position. Press one of the learnable buttons on the Genius Remote, ("7" in this example). This button will be used to store the new code. The READY indicator will flash at this time. (The light will remain lit for approximately 15 seconds.
USING THE GENIUS REMOTE TO LEARN ADDITIONAL FUNCTIONS FOR CLU-850GR If the storing was not done correctly, or the codes are too long to learn, or no more codes can be stored in memory due to memory overflow, the LEARN indicator and READY indicator will flash on and off. Set the LEARN/USE mode select switch on the back of the Genius Remote to "USE" and check that the button to which the code is stored operates correctly. If it does not operate correctly, repeat from step 1.
EASY GRAPHIC GUIDE EASY GRAPHIC GUIDE Press MENU on the remote control to display the different features on your HITACHI TV. The feature to be selected will be highlighted in a magenta (purple) color. Press the CURSOR buttons to highlight a different feature. Press ENTER on the remote control to select a feature. NOTE: Press the CURSOR buttons first to view FAVORITE CHANNELS (See Page 47.
EASY GRAPHIC GUIDE AIR/CABLE AUTO PROGRAM CHANNEL MEMORY CLOSED CAPTION Select antenna or cable TV. First time setup for channel buttons. Channel buttons, add or erase. Feature to display dialogue/text. Return video and audio adjustments to factory settings. CHANNEL CAPTION CHILD LOCK PROGRAM LIST VOLUME CORRECTION Label channels PAY1, ABC, etc. Block channel picture & sound. Check channel name, scan, childlock. Lower volume on selected channels.
EASY GRAPHIC GUIDE PREFERENCE ADJUST PREFERENCE SETTING SURROUND Adjust balance, bass, and treble. Improve sound performance. Special sound effects.
SET UP SET UP Select SET UP when setting your TV up for the first time. Use the CURSOR UP/DOWN buttons on the remote to highlight the function desired. AIR/CABLE AIR Select AIR if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit. Your choice will be shown on the display. Reception channels for each mode are shown at the right.
SET UP Refer to your cable or TV guide for channel identification standards. If certain CATV channels are poor or not possible in the CATV1 mode, set AIR/CABLE to CATV2. AUTO PROGRAM This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over unused channels when using the CHANNEL UP ( ) or DOWN ( ) buttons. If the MENU button is pressed while the auto programming function is engaged, programming will stop.
SET UP program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or . The selected function will be in magenta. Your choice for the function will be blue. DISPLAY: ON/OFF is to turn the display "ON" or "OFF". MODE: C.C. (Closed Caption) is for the program you are viewing. MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the entire screen and viewing the TV program is not possible.
FAVORITE CHANNELS FAVORITE CHANNELS The FAVORITE CHANNELS function will allow you to select up to 16 favorite channels by pressing the cursor buttons. Use the CHANNEL , or number buttons to select one of your favorite channels. Use the CURSOR buttons to select the location (in magenta color) for your favorite channel. Press ENTER to save the channel location. Enter channel 00 to erase a favorite channel. Highlight ACTION and press ENTER to use your favorite channels.
FAVORITE CHANNELS change the channel and moving picture for the Favorite Channel Preview. The Favorite Channel Preview is removed when the cursor , is pressed.
RESET RESET Use the reset to change your preferred video and audio adjustments to factory settings. NOTE: This RESET Selection will not change your preferred adjustments. To change back to your adjustments, see VIDEO (Page 54 and 56) or Audio (Page 57).
RESET NOTE: This RESET Selection will not change your preferred adjustments. To change back to your adjustments, see VIDEO (Page 54 and 56) or Audio (Page 57).
PROGRAM PROGRAM This Selection contains advanced feature switch will make TV viewing easier and more enjoyable. CHANNEL CAPTION Use this feature to give channel names to up 30 channels for each antenna source. Press the CURSOR , to select letters. Press the CURSOR , to change position. Press ENTER to set the CHANNEL CAPTION and it will appear in the top left corner of the screen. Press CHANNEL , or the number buttons to select and label additional channels. Press MENU to exit.
PROGRAM to review more channels. Press CURSOR , Press MENU to EXIT. 4 CHILD LOCK This function will block out the picture and sound of the selected channel. The code to set or cancel CHILD LOCK is a three digit key number. The factor preset key number is 000. The picture and sound will now be blocked out for this channel. Repeat the same steps to cancel the CHILD LOCK. To change the key number, select key number change.
PROGRAM Press the CURSOR Use the Channel , , to select one of the four volume corrections. or number buttons to select a channel. Press ENTER to set the channel. Press CURSOR , to adjust volume level. Press MENU to exit. NOTE: 1. VOLUME CORRECTION adjustment is for the channel displayed in the top right corner of the screen. To adjust a different channel, you must select the channel with the channel or number buttons and press ENTER. 2.
CLOCK CLOCK Use this feature for all time related functions. CLOCK SET The time must be set before you can use the on/off timer or automatic message. Use the NUMBER buttons and CURSOR , to set the time. The AM or PM selected will be highlighted in blue. ON/OFF TIMER This function will automatically turn the TV on or off, one time only or everyday. The step to change will be in magenta. Press the number buttons to select the time the TV will turn "ON" or "OFF".
CLOCK Select CANCEL and press ENTER to erase time. NOTE: You can set either "ON" time only, "OFF" time only, or both. The mode will be the same for both. CAUTION: Do not use your TV as a deterrent when away from home by using both the ON and OFF TIMERS. For safety, the TV should be turned off when you are away from home. AUTOMATIC MESSAGE Use this function to set one or two personal messages every day or one time only. Use the CURSOR , Use the CURSOR , to select a letter or other character.
CLOCK Press ENTER to start and MENU to exit. NOTE: Automatic Message-2 is the same cursor operation.
VIDEO FOR 35UX60B VIDEO FOR 35UX60B Select VIDEO to adjust picture settings, and to improve picture quality. PREFERENCE ADJUST Use this feature to adjust contrast, color, etc. Press the CURSOR buttons to select and make adjustments. The function to be adjusted will be in magenta. CONTRAST- Use this function to change the contrast between black and white levels in the picture. This adjustment will only affect the picture when the PICTURE SETTING AI is OFF. (See page 55.
VIDEO FOR 35UX60B 55.) RESET- When RESET is selected, press ENTER to return video adjustments to factory preset conditions. PREFERENCE SETTING Your HITACHI TV has an AI (Artificial Intelligence) function which will automatically adjust picture settings to produce the highest quality picture possible. When AI is magenta, use the cursor , to turn the AI "ON" or "OFF", Your choice will be in blue. Use the CURSOR Use the CURSOR , , to select function. to turn function "ON" or "OFF".
VIDEO FOR 35TX10B VIDEO FOR 35TX10B Select VIDEO to adjust picture settings, and to improve picture quality. Use this feature to adjust contrast, color, tint, brightness, sharpness, and white control. Press the CURSOR buttons to select and make adjustments. The function to be adjusted will be in magenta. CONTRAST - Use this function to change the contrast between black and white levels in the picture. COLOR - Use this function to adjust the level of color in the picture.
AUDIO AUDIO Select AUDIO to adjust the TV to your preference, to improve the sound quality, and to select special sound effects. PREFERENCE ADJUSTMENT Use this to set balance, bass, and treble. Press the CURSOR buttons to select and make adjustments. The function to be adjusted will be in magenta. BALANCE - This function will control the left and right balance of the TV internal speakers, the AUDIO TO HIFI output, and the surround speakers.
AUDIO Use Preference SETTING to improve the sound performance of your TV depending on listening conditions. Use the CURSOR Use the CURSOR , , to select a function. The function will be in magenta. to change function. Your choice will be in blue. MTS MODE (Multi-Channel Television Sound) will allow you to select STEREO (a stereo broadcast), SAP (second audio program) which may be a secondary language, weather report, etc. or MONO (monaural sound) used when receiving a weak stereo broadcast.
AUDIO For external speaker with Internal/External switch, sound reproduction is as follows. (For 35UX60B Only.) TELEVISION ON SCREEN DISPLAY AND REAR SPEAKER CONNECTION A On Screen Display Int. Speaker: "ON" -andRear Switch to Int.: Internal Speaker is "ON" -orRear Switch to Ext.: Connect Ext. Speaker first or no sound will be heard. External speaker in "ON". B On Screen Display Int. Speaker: "OFF" -andRear Switch Int. or Ext.: Int. or Ext.
AUDIO NOTE: The television set internal speaker is connected in parallel with an external speaker connection which will allow you to use the switch located at the rear of the CTV to switch either the TV sets built in internal speaker or to a consumer connected external speakers.
AUDIO FOR 35TX10B AUDIO FOR 35TX10B SURROUND The following surround sound settings will reproduce the "live" sound you would hear in concert halls, movie theaters, etc. when you set up your speaker system as shown in the section on rear panel connections on page 18 and page 24. The surround sound system is most effective with movies played on a stereo VCR.
AUDIO FOR 35TX10B • Your play VCR must be a HI-FI or stereo unit. See page 18. For stereo VCR connection. • Set must be outputting stereo. (See MTS mode: stereo. See page 58.
AUDIO FOR 35UX60B AUDIO FOR 35UX60B SURROUND The following surround sound settings will reproduce the "live" sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on rear panel connections on page 17 and page 23. The Surround sound system is most effective with movies and other stereo material that is Dolby Surround encoded, and played on a stereo VCR.
AUDIO FOR 35UX60B can enjoy the feeling of a movie theater in your home. * Dolby and the double-D symbol are trademark of Dolby Laboratories Licensing Corporation. Use CURSOR , To select the Dolby Surround function NOTE: Dolby Surround speaker outputs are always "ON" regardless of whether the set's internal speakers are "ON" or "OFF".. (INT/EXT Speakers) INPUT BALANCE Use the CURSOR , to select input balance.
AUDIO FOR 35UX60B front speakers.
CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL CARE OF YOUR HITACHI COLOR TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened with warm water. Dry with a soft cloth. (A mild soap may be used if the screen is extremely dirty.) Place the TV and remote control away from extreme heat, humidity and extremely dusty places.
RECEPTION PROBLEMS RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
RECEPTION PROBLEMS causes loss of contrast in the picture.
CHECK HERE BEFORE CALLING FOR SERVICE CHECK HERE BEFORE CALLING FOR SERVICE Click here to see Troubleshooting chart. FOR 35UX60B This Color Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage or power surges. IF YOUR SET SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1) Push the power switch (ON/OFF switch) once.
SPECIFICATIONS SPECIFICATIONS Features: • Superfine Picture Quality 750 Line Horizontal Resolution (35UX60B) 700 Line Horizontal Resolution (35TX10B) • Dark Tint Tube, INVAR Mask (35UX60B), AK Mask (35TX10B) • Genius Remote CLU-850GR (35UX60B) and CLU-692GR (35TX10B) Controls many VCR brands and cable boxes, and other audio/video equipment • ICON: Easy Graphic Guide • Full set of Input Jacks, including S-Video • Artificial Intelligence System (35UX60B) • Closed Caption Decoder • Advanced high resolution P
SPECIFICATIONS Chrominance (C) • Audio input impedance • Average input level • Maximum input level 0.286Vp-p, 75 Ohm 47k Ohm 470mVrms 940mVrms Outputs: • Video • Audio (fixed) 1.0Vp-p, 75 Ohm 0 ~ 470mVrms, 1k Ohm Dimensions: • Height (in.) • Width (in.) • Depth (in.) • Weight (lbs.) 35UX60B 30 1/16 35 31/32 24 13/16 184 35TX10B 30 1/16 35 31/32 24 13/16 184 NOTE: Due to improvements, specifications in this operating guide are subject to change without notice.
NOTES NOTES (blank page) HITACHI SERVICE HOTLINE To locate an authorized HITACHI service facility in the continental U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day 800 HITACHI 1-800-448-2244 Hitachi Home Electronics (America), Inc. Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
NOTES 94