User's Manual

HOOK-UP CABLES AND CONNECTORS

receptacle

2. VHF (300-Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna, disconnect the (VHF or

UHF) indoor antenna leads from screws of the (VHF or UHF) adapter, and connect

outdoor (VHF or UHF) antenna leads to these screws of a (VHF or UHF) adapter.

3. When both VHF and UHF antennas are connected

Attach an optional ANT. MIXER to the TV antenna terminal, and connect the cables to

the ANT. MIXER.

Notes:

1. If an outdoor antenna/CATV is to be used, disconnect the indoor antenna. Do not leave

both the indoor and outdoor antennas/CATV connected at the same time, since ghosting

and poor reception may result.

2. Consult your dealer or service store for the ANT. MIXER and (VHF or UHF) adaptor.

3. The special converter (decoder) will be supplied by the cable company.