User guide

REAR PANEL JACKS

Click to see Rear Panel Jacks.

 Antenna Inputs/Output

The "ANT" button on the Genius remote control allows you to switch between two

separate 75-ohm RF antenna inputs, Main (VHF/UHF) and Auxiliar (AUX). The antenna

output labeled "To converter" allows the main (VHF/UHF) antenna connection to pass

directly to a different source such as a pay-TV cable decoder.

 Audio/Video Inputs 1, 2

The "AVX" (Auxiliary video) button will step through each video source and the current

antenna input each time it is pressed. Use the audio and video inputs to connect

external devices, such as VCRs, camcorders, laser disc players, video games, etc.

 Output

These jacks provide fixed audio and video signals which are used for recording.

 Audio to Hi-Fi

These jacks provide variable audio output to a separate stereo system amplifier. With

this connection, the audio to the stereo can be controlled by the television's remote

control.

 Rear Speaker Terminals

These terminals are used to connect external speakers, which are used for the surround

sound feature. The volume level is controlled by the remote control main volume

buttons and also by an independent rear volume feature found in the "sound" function

menu. Use speakers with 8impedance only. Terminals are switchable Internal/External

Speakers.

 S-Video

Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video

output capability.

NOTE: Model 35TX30B has only one antenna input and one external speaker output

connection with an internal/external switch.