Manual

CONNECTING EXTERNAL VIDEO SOURCES

xv, T __/_

CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER

I. Connect the cable from the VIDEO OUT of the VCR of the laserdisc player to the INPUT (VIDEO) jack on the FV set below_

2. Connect the cable from the AUDIO OUT R d the VCR or the laserdisc player to the INPUT(AUDIO/R) jack.

3. Connect the cable from the AUDIO OUT L of the VCR or tile laserdisc player to the INPUT(AUDIO/L) jack.

4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears automatically after

approximately eight seconds.

5. Press the INPUT button to return to the previous source.

(or

____J

TV INPUT TERMINAL

@@@@]

S-VHS V L R

OlJ]PUT

BACKOF VCR

EZCZ7]

HITACHIMODEL

or similar model

NOTE:

Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be

abnormal if the connection is loose.

If you have an S-VHS VCR, use the SdNPUT cable in place of the standard video cable.