Operation Manual

- 38 -
Appendix C: DVD Player Selection (continued)
Set up hint:
Example) HITACHI DVD

To operate HITACHI DVD player, press and hold the button, followed by the

button.
1. Set up the maker.
Press
button to indicate the DVD LED on the remote control.
Whilst the DVD LED is flashing, press
and

.
2. Set up the maker type.
Release the

button whilst keeping button depressed.
Then, press the

button.
3. Confirm the setting.
After setting the maker and type, press the POWER button on the remote control. If the
DVD does not switch on, repeat step 1 and 2 using other maker types as listed in the chart
on 37.
NOTE
 Not all models of the listed makers can be operated using this remote control.
Information for users applicable in European Union countries
This symbol on the product or on its packaging means that
your electrical and electronic equipment should be disposed
at the end of life separately from your household wastes.
There are separate collection systems for recycling in EU.
For more information, please contact the local authority or
the dealer where you purchased the product.
1-ENG-3730W-HL02126UK-37 INCH-(LG)-PEU_IDTV-NEW SOFT-50090756.p65 21.07.2006, 16:4238