Operation Manual

important note.
Once the TV has found all your local stations, they are then automatically assigned a
programme numberand name, if available from the broadcast.
important note before starting Auto Setup
start A. P.S. (Auto Programming System)
GB
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a p re-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.
After the First Time Installation is set, the following message appears on the
screen.
1
2
First time installa tion
Choose Country
Set country and continue installation
OK UK
Do you want to start automatic search?
Yes No
To start automatic search, select to cancel select This process will
take about five minutes. To cancel searching, you can press “ ” button at any
time during the process.
“Yes”, “No”.
3
MENU
Code c 4:3
Codec 16:9
Sea rching UHF channels 62 . Please wait. This will take a few min utes
Cancel searching
Automatic Search
After process is completed, a message asking for analogue
channel searc h appears on the screen. To continueAPS, first select the language
andcountry by pressing / button and then press the REDor“ ” button.
Automatic Search
OK
4
5
APS is running. ..
UK - I 055,25 Mhz
Cancel
AfterAPS is finalized, the programme table will appear on the screen.For details
Program menu please refer to the Installation Menu section of the instruction
book.
Language
UK
PLEASE CHECK ANTENNA CABLE
OK Cancel
AUTO PROGRAM
AUTO. PROGRAMMING SYSTEM
Country
English
GBGB
When the TV is turned on for the first time, the menu for the language selection
appears on the screen. The message
is written in all language options sequentially in the menu on the
screen. By pressing or buttons highlight the language you want to set and
press “OK”. After then, First time Installation Menu will appear on screen. By
pressing or buttons, s elect country item you want to set and press “OK”
button.
“Welcome please select your
language!”