User Guide

- 1 -
Installation Of The TFT TV To The Wall
1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).
Unscrew the 6 screws (M4 x 8) that attach the foot assembly to the TFT panel and remove
the foot assembly from the TFT panel.
2- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting
stencil on the wall.
The stencil is used
for placing the wall hangers on the wall, properly.
3- Level and mark with a pencil the 4 mounting points on each wall hanger.
Drill pilot holes for the plastic anchors (7x30) and then fix the wall hangers with 8 screws
(4 x 30).
4- Raise the TFT panel and hang it to the holes on the wall hanger from the 4 hanging
screws at the rear of the TFT panel.
),*85(
*%