Instructions for use 42PD6700U GB
Contents Remote Control Buttons ......................... 2 Other Features ...................................... 26 PLASMA TV ............................................. 4 Features ............................................... 6 Panel Features .................................... 6 TV Status ............................................ 26 Mute Indicator ..................................... 26 PIP and PAP modes ........................... 26 Freeze Picture ....................................
Remote Control Buttons -2-
= Menu On/Off = Stand by On/Off = Program Information AV5 =AV5 mode SEL= Select TV/ DVD /SAT AV4 = AV4 mode AV3 = AV3 mode AV1 = AV1 mode AV2 = AV2 mode DTT/TV = Selector button for Digital/Analogue mode RGB2 = No Function RGB1= PC mode = Go back to previous menu `= Cursor Right OK = Enter b =Cursor Down = Picture Mode P+/ - = Programme Up/ Down = Mute On/Off 0 - 9 = Digit buttons = PIP / PAP / TV BLUE = Only used in Teletext mode YELLOW = Only used in Teletext mode = Reveal P- = Programme Down /
PLASMA TV FRONT VIEW REAR VIEW -4-
On/Off switch Subwoofer Out Volume Up, Volume Down buttons Prog. Up, Prog.
Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. When no valid signal is detected, after 5 minutes the TV switches itself automatically to stand-by mode. PLL (Channel Search) PC Input (Support up to SXGA 1280 x 1024) Use this apparatus in tropical and/or moderate climates.
Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these are easily identifiable by either the or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician. DONTs sult in a fatal electric shock.
nal one. Unauthorised substitutions may result in fire, electrical shock, or other hazards. 8. Servicing Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock. 9. Naked Flame Sources Do not place naked flame sources on the apparatus. WARNING: When the device is not in use for a long time, disconnect from power. Instructions for waste disposal: Packaging and packaging aids are recyclable and should principally be recycled.
Before Switching On Your TV Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections To The Aerial Input Socket NOTE: Remove the batteries from remote control handset when it is not to be used for a long period.Otherwise it can be damaged due to any leakage of batteries.
Initial Settings When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen. To start installation process, select Yes, to cancel select No. To select an option Yes or No, highlight the item by using or buttons and press the OK button.
Programme Selecting Operating The TV You can operate your TV using both the remote control handset and the buttons on the set. (Previous or next programme) Operating with the buttons on the TV set Press the P+ button to select the next programme. Volume setting and programme selection can be made by using the buttons on the control panel at the bottom of the TV. Press digit buttons on the remote control handset to select programmes between 0 and 9.
Press or button to highlight the desired option. If OK button is pressed while Yes is highlighted, the highlighted channel is deleted. Selecting No cancels the delete operation. Renaming channels Navigating the whole channel list or button for selecting the previPress ous or next channel. To watch a specific channel, highlight the Select item in the channel list using the or button. Then using the or button select the desired channel and press the OK button.
Select the channel to be locked by highlighting it and select the Lock option by pressing or button. When the OK button is pressed, a password box is displayed. On Screen Help Pressing INFO Button For all menus press the button to display the help information about the menu functions. For Channel List menu the following message is displayed on the screen. Enter the password using the digit buttons on the remote control. The Lock icon will now be displayed next to the selected channel.
menu. All the services are searched and a channel table is created automatically. All channels found are stored in a sorted form with respect to their channel numbers. Some services may not appear with the correct channel number. At the time of printing, not all broadcasters are sending their channel number information. Press the OK button to search for analogue channels.The following menu appears on the screen for analogue channel search.
Favourite Mode This function enables or disables the favourite channel list mode. See Channel List menu Favourites on page 13. The various configuration functions are displayed in a list, along with a quarter-screen image of the currently selected channel. You can select a function by highlighting the coror butresponding menu line using the ton. Use or button to turn on/off favourite mode.
Both automatic upgrade methods result in standby mode either upgraded or not. If the automatic upgrade is set to Disabled then this function will not work. Search For New Version (Manual upgrade) Manual upgrade starts if the Search for New Version item is highlighted by using or button and activated via pressing the OK button. After Search for New Version is activated, the IDTV tunes to each frequency that have been stored in its database and looks for the new software.
on your TV and select external input (refer to your VCR instruction book). NB. If you switch on your TV whilst the timer recording is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded. Language To set an event, highlight its mode button or button and press the OK using the button to display the timer entry window. Some programmes are broadcast in two or more languages simultaneously.
press the OK button to display TV Setup menu screen. Detailed information about Sound, Picture and Feature menus are in AnalogueTV Menu System section on page 18. Common Interface Press the button to display the Main Menu and use the or button to highlight the Common Interface line and press the OK button. 3. Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated. Some CAMs may require the following set up.
Picture menu Colour By pressing _ / ` button, select the first icon. Picture menu appears on the screen. By pressing a / b button, select Colour. Press ` button to increase colour. Press _ button to decrease colour. Colour level can be adjusted between 0 and 99. Hue This item is displayed in picture menu when the TV receives an NTSC signal. By pressing a / b button, select hue. Press ` button to increase hue. Press _ button to decrease hue. Hue level can be adjusted between -31 and 31.
Reset By pressing a / b button, select Reset. Press _ / ` or OK button to reset the picture modes to factory default settings. Sound menu By pressing _ / ` button, select the second icon. Sound menu appears on the screen. quency by a / b button and increase or decrease the frequency gain by pressing _ / ` button. Press the menu. button to return to the previous Balance By pressing a / b button, select Balance. Press ` button to increase balance to the right.
balance By pressing a / b button, select Balance. Press ` button to increase balance to the right. Press _ button to decrease balance to the left. Balance level can be adjusted between -31 and 31. Press the menu. button to return to the previous that can accept an active subwoofer if you wish to create very high levels of Bass. 3DS This feature is used to create the impression that sound is coming from around the room instead of from the set speakers.
ton to either on or off. When off is selected, there will be no difference in the operation of your TV. When on is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons, except the Power on/off button, at the bottom of the TV will not work. If one of these buttons is pressed, Child Lock On will be displayed on the screen. Language By pressing a / b button, select Language. By pressing _ / ` button, you can select the language.
5 mins but try not to leave static images on the screen for long periods of time. Install menu By pressing _ / ` button, select the fourth icon. Install menu appears on the screen. Fine Tune By pressing a / b button, select Fine Tune. Press _ / ` button to adjust the tuning. Search By pressing a / b button, select Search. Press _ / ` button to start program searching. The searching will stop when a signal is found. You can also enter a frequency value directly by pressing the digit buttons.
the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically. Name: To change the name of a decided programme, select the programme and press the RED button. The first letter of the selected name starts to blink. Press a / b button to change that letter and _ / ` button to select the other letters. By pressing the RED button, you can store the name. Insert: Select the programme which you want to insert by navigation buttons. Press the GREEN button.
Set your PCs resolution correctly before connecting to the TV. See the table on page 34 for supported modes. Use a D-SUB cable to connect the TVs PC input to the computers RGB output terminal. mended to be done with the full screen image for the proper adjustment. H (Horizontal) Position This item shifts the image horizontally to right hand side or left hand side of the screen. Select H Position item by using a / b button. Use _ / ` button to adjust the value.
Other Features TV Status Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the upper right side of the screen when a new programme is entered or button is pressed. Mute Indicator Contrast, Brightness and Colour Temperature adjustments in this menu are identical to adjustments defined in TV picture menu. It is placed in the upper left side of the screen when enabled. To cancel mute, there are two alternatives; When Colour Temp is Manual, you can also adjust the R,G,B items.
Zoom Modes 16:9 Subtitle: Zoom mode can be changed by pressing the button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes. This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Note: You can only choose 4:3 and FULL in PC mode.
To Operate Teletext Select a TV station where Teletext is being transmitted. button. Usually the list of con Press the tents (index) is displayed on the screen. Pressing the button again will conceal the revealed answers. To Select A Subcode Page Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. Select the required subcode page number by pressing four digit buttons (e.g. 0001).
screen backward one page at a time. etc.) which have Scart sockets to the TV, use SCART 1, SCART 2 inputs. For Fastext The subject-heading for the information may have a particular colour. Press an appropriate RED, GREEN, YELLOW or BLUE button in order to reach the relevant page quickly. If an external device is connected via the Scart sockets, the TV will be switched to AV mode automatically. Via Aerial Input TOP text mode of operation will be activated automatically according to the transmission.
Copy Facility Source selection for VCR recording. Select Feature menu. Select Av-2 Out by pressing _ / ` button. Select a source to copy the picture from that source. Search For And Store The Test Signal Of The Video Recorder Unplug the aerial cable from the aerial socket of your video recorder. Switch on your TV and put the video recorder on the test signal. (See the booklet for your video recorder.) Enter the Install menu and select search.
Aerial Connection Connect Peripheral Equipment - 31 -
your decoder and to the special Scart socket of your video recorder. Refer to the booklet of your video recorder. To connect your video recorder to the TV, refer to the TV and Video Recorder section. If you want to connect more equipment to your TV, consult your dealer. Connecting Headphones Use the stereo headphone socket at the rear side of the TV, to connect headphones. Connecting Subwoofer Use Subwoofer Out socket to connect an external, active subwoofer to the set to give a much deeper bass effect.
Specifications DTT Specifications TV BROADCASTING PAL/SECAM B/G D/K K' I/I' L/L' MHEG-5 ENGINE compliant with ISO / IEC 13522-5 RECEIVING CHANNELS UKengine Profile1 VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile. NUMBER OF PRESET CHANNELS 100 Frequency range 474 - 850 MHz CHANNEL INDICATOR On Screen Display Signal level -82.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1280x 1024, vertical sync. frequency range of 5685 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
Appendix B: DVD Player Selection You can use this remote control to operate the selected brand of DVD player by pressing the following buttons on the remote control simultaneously. Example To operate HITACHI DVD player, press and hold the INFO button, followed by the 1 button. Note: Not all models of the listed brands can be operated using this remote control. Note: Slide Show, Photo, Swivel and Rotate buttons have no function.
Appendix C: Main and PIP-PAP Picture Combinations - 36 -
UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi Television.
Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg E5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835694 Email: service.hellas@hitachi-eu.com HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.