User Guide

40
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
Basic Operation
1. Press
MENU
button on the remote control or
MENU
button on the control panel of
the unit. The DTT Main Menu is displayed on the screen as shown on the
right.
2. To select the item, press
buttons.
The selected item will be highlighted in Yellow.
3. Press
OK
button to set your selection.
The selected menu page will be displayed on the screen.
4. Use
buttons to choose the item on the MENU page.
Press
OK
button to set your selection.
5. Use
buttons to adjust the item values or choose options.
Press
OK
button to set your selection.
6. To exit from the menu, press
MENU
button.
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
<DTT Main Menu>
*This is the example of 42/55PD9700U.
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
Menu button
Menu button
About DTT Function
Please note that the DTT function of your television has several differences
depending on the model and service of each country. Check the reference page
for the details.
Menu / Function Difference Page
1. OSD
Channels (Channel List)
For 42/55PD9700C, "Channels" appears in the
main menu, and "Channel List" can be selected
from "Channels" menu. For 42/55PD9700U,
"Channel List" appears in the main menu.
24
40
42
43
48
Channel Sort Available only for 42/55PD9700C. 43
Country
The preferred country can be selected from
"Country" menu only for 42/55PD9700C.
41
Audio Language
The selectable items from the menu are
different.
47
Subtitle 47
2. Service
Receiver Upgrade
Depends on the service of each country.
49
Digital Teletext 44
Electric Programme Guide (EPG) 45
Timer programming 46
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Main Menu