Operating Guide LCD Rear-Projection TV 42V52

43
ASPECT
Mode
This function manually selects the Aspect Mode from six (6) choices.
Use the CURSOR buttons , ,  and  to select the menu item.
Press the SELECT button to select.
Auto Aspect
Automatically adjust the Aspect Ratio depending on the input signal to fill the screen.
Use CURSOR button  or  to highlight the Auto Aspect box.
Press the SELECT button to select. A “✓” in the box indicates that the feature is ON.
Vertical Position
This function allows you to adjust the vertical position of the picture when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or 16:9
ZOOM. For example, it will be useful for centering the picture area at both the top and bottom of the picture with 480i/480P signal.
Adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
Use the CURSOR button  or  to select menu item.
Use the CURSOR button  or  to adjust the function.
Press EXIT to quit the menu or select ASPECT to return to the main menu.
Use this function to select the Picture Format Aspect Ratio.
NOTES: 1. The Auto Aspect function is recommended on an input signal with VIDEO ID.
2. The Auto Aspect function is best used on composite video, S-Video, 480i and 480p component signals.
3. See page 22 for Aspect Mode availability.
NOTE: Vertical Position will not be available in 4:3 Standard and 16:9 Standard modes.
Aspect
Move
SEL
Return
0
Mode
16:9 Standard 16:9 Zoom
4:3 Standard 4:3 Expanded
4:3 Zoom1 4:3 Zoom2
Auto Aspect
Vertical Position
Locks
Chan. Manager
Aspect
Audio
Video
Move
SEL
Sel
Timers
Setup
or
Aspect
ON-SCREEN DISPLAY