Manual

USING THE REMOTE TO CONTROL

CABLE/SATELLITE BOX FUNCTmONS

Operating the precoded function for your cable/satellite box,

This remote is designed to operate different types of cable/satellite boxes. You must first program the remote to match the remote sys-

tem of your cable/satellite box (refer to page 31).

1. Turn ON your cable/satellite box.

2. Aim the remote control at the front of your cable/satellite box.

3. Press and release the cable/satellite (CBL/SAT) button to switch to cable/satellite pre-coded mode.

4. Hold down the CBL/SAT button on the remote and enter the two digit preset code that matches your cable/satellite box as shown

on page 31.

5. Aim the remote at the cable/satellite box and press the POWER button. The remote will turn off your cable/satellite box when the

correct two digit preset code is entered. When this occurs, the remote control is programmed for your cable/satellite box. If the

box does not turn off, try a different two digit preset code.

6. The remote will now control your cable/satellite box.

NOTES:

1. If your cable/satellite box cannot be operated after

performing the above procedures, your cabIe/sate!Iite box

code has not been precoded into the remote.

2. In the unlikely event that your cable/satellite box cannot

be operated after pedorming the above procedures,

please consult your cable/satellite box operating guide.

The remote control wiII remember the codes you have

programmed until the batteries are removed from the

remote control. After replacing the batteries repeat the

entire programming procedure as stated above.

(_ CABLE (CBL/SAT) Button

This button al!ows the remote to control your cable/satellite

box by setting it to CABLE/SATELLITE mode.

_ PRECODED CABLE/SATELUTE BOX Buttons

These buttons transmit the chosen precoded cable/satellite

codes.

(_ EXCLUSIVE TV Buttone

These buttons are for operating the TV.

POWER

MY CABLE/SATELMTE

BOX CODE mS:

NOTE: Refer to instruction manual of the Cable/Satellite Box for operation of the buttons exclusively for the Cable/Satellite Box.