Manual

USING THE REMOTE TO CONTROL

CABLE/SATELLITE BOX FUNCTIONS

Operating the precoded function for your cable/satellite box,

This remote is designed to operate different types of cabb/satellite boxes. You must first program the remote to match the remote sys-

tem of your cabb/satellite box (refer to page 31).

1. Turn ON your cable/satellite box.

2. Aim the remote control at the front of your cabb/satellite box.

3. Press and release the cabb/satellite (CBL/SAT) button to switch to cabb/satellite pre-coded mode.

4. Hotd down the CBL/SAT button on the remote and enter the two digit preset code that matches your cabb/satellite box as shown

on page 31.

5. Aim the remote at the cabb/satellite box and press the POWER button. The remote will turn off your cabb/satellite box when the

correct two digit preset code is entered. When this occurs, the remote control is programmed for your cable/satellite box. if the

box does not turn off, try a different two digit preset code.

6. The remote will now control your cable/satellite box.

NOTES:

1. if your cable/satellite box cannot be operated after

performing the above procedures, your cable/satellite box

code has not been preceded into the remote.

2. in the unlikely event that your cable/satellite box cannot

be operated after performing the above procedures,

please consult your cable/satellite box operating guide.

The remote control will remember the codes you have

programmed until the batteries are removed from the

remote control. After replacing the batteries repeat the

entire programming procedure as stated above.

CABLE (CBL/SAT) button

This button allows the remote to control your cabb/satellite

box by setting it to CABLE/SATELLITE mode.

PRECODED CABLE/SATELUTE BOX buttons

These buttons transmit the chosen preceded cable/satellite

codes.

@ EXCLUS!VE TV buttons

These buttons are for operating the TV.

POWER

CC>

iiiiiiiiiiiiiiiiiiiii

iiiiiiiiiiiiiiiiB

MY CABLE/SATELUTE

BOX CODE IS:

NOTE: Refer to instruction manual of the Cable/Satellite Box for operation of the buttons exclusively for the Cabb/Satellite Box.