Manual

iiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiii
Manuat Convergence Adjustment Mode
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
3. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased.
Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-START to access convergence
crosshatch pattern. The adiustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the adjustment point cursor using the CURSOR buttons, the Adiustment Cursor must be WHITE. Another way to move the
Adjustment Point Cursor is to press the foilowing buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the
adiustment point is WHITE, it will change to RED.
To Change the CNor of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE_.). Green color is fixed and cannot be adiusted.
To Adjust the Convergence
Move the Adiustment Cursor to the point to be adiusted. Use the CURSOR to match the RED and BLUE colors to GREEN (reference
color). Properly aligned, all three colors should appear white.
M_U
Video ]
Aspect ]
Audlo ]
Chan. Manager ]
Locks I
[ , Mo_e_E_,SeT I
........Ji!;_!_!_;_¸_ @i:M¸4_ @!_....
Setup
Nent_ Pr e Fer en_e
se_ the c]o_k
se_ the I_,puLs
set ]he color ¸ sysLen,
se_ Vir tua] HD
Se_ 8lack Side P_me]
Set Event ] h_er ¸
Set Closed C_,I_Li,_,
About Your ¸ 1_
HOW, _SELI Select
Setup
liiii___!i_i!_;;;ii_ _iiii_(_£i i_!!!!!!!!!!!!!!!!!!!!!!!!!i_
A71gns the Red, Green, and Blue
co]ors to correct for Magnetlc
Inf]uences.
Adjustment Mode
OAuto
Manual
If you want to adjust now_
L_
I _ Hove rN_Fj Re_utn I
................i;ii_;_;__)_ 41ii,_;!;__¸¸¸¸¸¸_ ,,,,,,,,,,,,,i!:!:i:i_;_.....
Adjustment Point
Cursor
/
........
....... /____
i
i
i
i
i
i
If convergence is acceptable after Manual Convergence adiustment, press EXIT button to access menu mode.
117 Manual Adjust
P]ease Enter Number.
0.Cancel and go to Nor'ma] Mode.
1.Done and go to Normal Mode.
2.Back tO Adjust Mode
3.Factory Reset and back to
Adjust Mode.
O 3.Select
Press the [0] button on the remote controi to CANCEL adjusted data and return to main picture.
Press the [1] button on the remote control to SAVE adiusted data and return to main picture.
Press the [2] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern).
Press the [3] button on the remote control to recall the factory pre-set convergence data.
52