- hitachi Opertaing guide Projection color tv 46GX01B 50GX20B

EXTERNAL CONNECTIONS

Connect only 1 component to each input jack.

COMPONENT: Y-CB-CR connections are provided for high performance components, such as DVD players.

Use these connections in place of the standard video connection if your device has this feature.

When using the Y-CB-CR input jacks, connect your components audio output to the TV's INPUT 2 Left and Right

Audio input jacks.

Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the

TV's CB input and the components R-Y output to the TV's CR input.

It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-

CB-CR inputs. (See pages 47 and 48.)

To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using Y-CB-CR jacks.

When using the Y-CB-CR jacks, INPUT 2 will be viewed as a blank PIP sub-picture. (see page 22)

EXTERNAL CONNECTIONS

CONNECTING EXTERNAL AUDIO AMPLIFIER

To control the audio level of an external audio amplifier with the remote control, connect the system as shown

below.

NOTE: To prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower

and adjust the sound using the remote control fo the TV set.