- hitachi Opertaing guide Projection color tv 46GX01B 50GX20B

PICTURE-IN-PICTURE (PIP)

Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This

Dual Tuner feature allows you to view antenna input on both the main picture and sub-picture simultaneously,

with separate tuning control for each. The Dual Tuner can operate with only one (ANT A only) or two inputs (ANT

A and ANT B).

ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B and

COMPONENT: Y-CB-CR Input 2 sources can only be viewed as a main picture. To select between main picture

and PIP sub-picture tuning, press PIP CH button on the remote. Every press of the PIP CH will highlight the

main or sub-PIP source. The top channel display is the main picture and the bottom display is the sub-picture.

This method of picture tuning is the same for one antenna inpu (ANT A only) and two antenna inputs (ANT A and

ANT B)

The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time.

You can watch a TV program while viewing other programs from the ANT A source or any of the video inputs.

(1) PIP button

Press the PIP button and a sub-picture will appear in one of the two different modes (SINGLE or SURF),

depending on the last selection of the PIP mode. To change the PIP mode use the CURSOR

or buttons

and the new selection will appear the next time the PIP function is used.

SINGLE MODE PIP

Press the PIP button and a sub-picture appears in one corner of the screen. Press the button again to reduce the

size of the sub-picture. Press the PIP button a third time to remove the sub-picture from the screen. Use the PIP

CH button to select between main and sub-picture tuning control (indicated by hgihlight). Press the INPUT button

when a sub-picture channel tuning is being controlled, to change between VIDEO: 1, VIDEO: 2, and ANT A

antenna source. (ANT B soure cannot be viewed as a sub-picture and COMPONENT: Y-CB-CR Input 2 source

will be displayed as a blank sub-picture).

NOTE:

Since ANT B source cannot be viewed as a sub-picture, only single PIP mode is possible when ANT B is selected