Operating Guide LCD REAR PROJECTION TELEVISION 50C10, 50C10E

43
CHANNEL MANAGER
Press the CURSOR button  or  to review more channels.
Press EXIT to quit the menu or select CHANNEL LIST to return to previous menu.
Move
SEL
Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Chan. Manager
Channel List
Move
SEL
Select
Channel Source
Auto Channel Scan
Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
SELECT
This function allows you to review which channels are labeled (Ch ID), which have been added to
Channel Memory (Scan), and which are protected by Lock.
Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to
the remote control channel  or  buttons.
Scan
Channel List
To add (Scan-On) or skip (Scan-Off) additional channels while in CHANNEL MANAGER, press the CURSOR button  or  to highlight
the channel number. Once the desired channel is highlighted, CURSOR  to scan column, then press CURSOR  or  to select ON
or OFF.
Move
SEL
Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move
SEL

Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move
Set
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Ch# Scan CH ID Lock
2 On --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
[]
[]
[]
Move
Set
Tune
Chan. Manager
Ant. A
Chan. Manager
Ant. A
Chan. Manager
Ant. A
Chan. Manager
Ant. A
NOTE: Lock feature cannot be selected or set in CHANNEL MANAGER.
ON-SCREEN DISPLAY