',CTION COLOR TV _TING GUIDE IMPORTANT SAFETY INSTRUCTIONS FIRST TIME USE ,_,_ 2-4 5-22 THE GENIUS REMOTE CONTROL 23-35 ULTRATEC BIT-MAP ON-SCREEN DISPLAY 36-70 ASK -_-RGY STAR ® Partner, Hitachi, USEFUL INFORMATION Ltd. has determined _eets the ENERGY STAR ® guidelines for energy that this efficiency.
IMPORTANT Follow all warnings and instructions marked on this projection television. The lightning flash triangle, is intended "dangerous voltage" sufficient magnitude WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, The exclamation point within an equilateral triangle, is intended to alert the user to the presence of imporlant operating and maintenance (servicing) instruclions in lhe lilerature accompanying the appliance. DO NOT REMOVE COVER (OR BACK).
SAFETY TIPS IMPORTANT SAFETY INSTRUCTIONS CAUTION: SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI PROJECTION TELEVISION • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow ait instructions. Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units.
SAFETY TIPS PROTECTION 16 1 AND LOCATION OF YOUR TELEVISION 17 If an outside antenna is connected to the tetevision, be sure the antenna system ls grounded so as to provide some protection against voltage surges and buildup static charges¸ Section 810 of the National Electrical Code, NFPA overhead power lines or other_ electrical tights or power circuits, or where it can fail into such power lines o_ circuits When installing an outside antenna system, extreme care should be taken to keep from touching s
ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. O(D#O (D(DQ QQOD (OC) O) .....O'(QO ....... 0 0 (D C) (o q) .... 0 (o (b qo 0 ...... 0 o _®_ 0_o® CLU-5711TSI PART 1. CLU-5713TSI PART NO, NAME 1. 2, ILLUSTRATION 43" TELEVISION STAND SP-43W (Not included, order separately) OPTIONAL CUSTOM HITACHI TELEVISION H530052 STAND Excellent for VCR and video4ape storage. Special features include smoked glass doors and an adjustable shelf.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS FRONT VIEW IIIIIIIIII Models: 61UWX10BA, 43UWX10B 53UWX10B, _ Models: 61SWX10B, 53SWX10B, @0 ® _ [_ 61SWX12B, 53SWX12B ® ,! HITACHI ...... oo i o% ..... ® ® ® T ® (_) MENU/SELECT button This button allows yeu te enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
FRONT PANEL CONTROLS (_) POWER light You will see a red light when the TV is turned on. (_) PERFECT PICTURE sensor The Perfect Picture sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (see page 57) (_ REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. (_) MAGIC FOCUS Use this button to adjust your picture quality to optimum performance.
FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience examples: INPUT MENU VOL- VOI.+ [] [] D D EgQT SELE,_r OO I to allow you to easily connect a camcorder CH- D ,%_o.-, ]o or VCR as shown in the following CH+ INPUT MENU VOI.- VOI.+ CH- CH+ D D D D D D D _,r_ ,ELE_ " 'OU_." " T I,.-,10o o] _ic _IC_ [] FOCUS IllNP S-INPUT (Optional, see note) OUTPUT @ _) S-VHS V _Lou_ P UT S-VHS Video camera Back ot VCR J, NOTE: 1.
REAR PANEL JACKS Models: 61UWX10BA, 43UWX10B 53UWX10BA, @ ® Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B ® NP[_ ANTA ANTA @@ TO .... _ SVIDEO ! oo. SVDE 1 ANT B Y/VIDEO_ AUBIO I INPUT2 AgBO INPUT4 CO_VERTEn ÷[_ _ _ _1 0 S VI,_EO• ÷ ANrB y/VIDEO ® AUglO JNPU[5 OIJT f T@ (_) f t t VOEO YIVIOEO t t NPUT4 INPUT5 t t MO_I_TO£ . Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B.
REAR PANEL JACKS (_) Component: Y-PBPR Inputs Inputs 4 and 5 provide Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use standard video signal for INPUT:4 and 5. Items (_ - (_ are for 53/61SWX10B and 53/61SWX12B only. (_) REAR SPEAKER Output Terminals These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the television's main volume.
REAR PANEL CONNECTIONS TYPICAL (43UWX10B FULL-FEATURE and 53/61UWX10BA SETUP MODELS) DVDPlayer Ps/CB P_/CR L OUTPUT @@@ iiiii I I I I I Optional, see on page15, F Stereo System Amplifier m I Optional,seetips [s o Laserdisc player, VCR, camcordel, etc I 1. 2. 3. I I iiiii CableTVBox NOTE: I ooo? P8 PR L OUTPUT HDTVSet-TopBox Connect only 1 component to each input jack. Follow connections that pertain to your personal entertainment system.
FIRST TIME USE TYPICAL (53/61SWX10B L[ FULL-FEATURE SETUP AND 53/61SWX12B MODELS) DVOPlayer VCR#1 = Y © @oo _NT S VOEOOv_JT L k_l P_CB PR/CR L R @ @OUTPUT @@@ 0] ] i!iii I [ I I 11 Surround Speakers ®@ -y+ Optional, see tips on page 15% \ s VlOE0• s_ II, L_ • * F Stereo System Amplifier Cable[_/Box Optional, see tips on page 15 SubWoofer NOTE: 1. 2. 3. t J m Laserdisc player, VCR, ca_]lcolder, etc.
REAR SPEAKER TERMINAL CONNECT AFTER TURNING THE POWER CONNECTIONS TO THE TV OFF, (Rear speaker connection applies to SWX model only) Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
f_ _ CONNECTING CONNECTING EXTERNAL AUDIO SOURCES EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below.
FIRST TIME USE Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Match the numbers below to the diagrams for speaker placement and refer to the table on page 18 for the different surround sound requirements. (See pages 65-67 for SURROUND functions.) (_The television's internal speakers. The television's internal center channel speaker, which is on only when the television is in SURROUND-STADIUM, ROCK ARENA, SURROUND-JAZZ CLUB, SURROUND-PRO LOGIC, or SURROUND-DOLBY DIGITAL mode.
FIRST TIME USE Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B SURROUND REQUIRED OPTIONAL FEATURE CONNECTION CONNECTION OFF _ Receive mono and stereo sound. STADIUM Listener has feeling of being at a stadium. ROCK ARENA JAZZ CLUB Listener has feeling of being at a rock concert. _ _2__4_ Listener has feeling of being at a jazz club. DOLBY Movie theater reproduction, with separate left, PRO LOGIC DOLBY DIGITAL EFFECT center, right, and surround channels.
CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner's manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features.
f_ CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUTI~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4.
f_ CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2 AND 3 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4.
f_ CONNECTING CONNECTING A COMPONENT EXTERNAL VIDEO SOURCES SOURCE TO VIDEO 4 OR 5: Y-PBPR , 1. Connect the cable from the Y OUT of the Laserdisc/DVD set below. 2. Connect the cable from the CB/P B OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack. 3. Connect the cable from the CR/P R OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack. 4.
THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area. To operate your TV, point the remote control at the remote indicating that the remote will now control your television.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV @__Q ® ®', I ---'1 ---- c _ELP AS_ ®_ -@ ®® PIP MODE O PROG SWAP O: W _'c_ r .... O -- _ O_ REC O O :O SLOW _ROG TV_R ® 0(2_ -- J REC Hc',_' (_ PIP ACCE$8 J SWAP P P MOOE SLOW ® H_T_' J POWER button Press this button to turn the TV set on or off when the remote is in TV mode. (See page 23 for instructions on how to set the remote control to TV mode.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV (_ AV1, AV2, AV3, or CD, TAPE, AMP buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video NOTE: Your remote control "SOURCE WIZARD" buttons are either labeled as "AV1, AV2 and AV3," or "CD, TAPE, and AMP." If your remote control "SOURCE WIZARD" buttons are labeled as "AV1, AV2, and AV3," please program your Audio/Video components as fellow for best performance. Use "AVI" to program your CD brand.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV (_) THUMB STICK/SELECT button All the On-Screen Display features can be set or adjusted by using the THUMB STICK. The THUMB STICK will highlight functions or adjust and set different features. Press the THUMB STICK toward desired direction and press down to SELECT. (_ VOLUME, MUTE button Press the VOLUME up (A) or down (Y) button until you obtain the desired sound level.
PICTURE-IN-PICTURE IPIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B). ANTA input can be viewed as both the main picture and the sub-picture simultaneously. ANT B can only be viewed as a main picture.
PICTURE-IN-PICTURE IPIP) PICTURE-IN-PICTURE CONT. SPLIT MODE PIP Split Mode PIP displays the main picture and sub-picture evenly on the screen. Main P ctu re _;_ Sub Pictu re I: SURF MODE PIP This feature will automatically scan all active channel numbers (those set in memory) and display them as PiP sub-pictures, the right edge of the screen. Press the PiP button a second time to remove the sub-pictures from the screen. along y, i, NOTES: 1. 2. 3. 4. 5.
PICTURE-IN-PICTURE (_ I IPIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again. NOTE: When PIP is on, the FREEZE function will only operate when SINGLE/SPLIT PIP mode is chosen.
USING THE REMOTE TO CONTROL Operating the precoded function VCR FUNCTIONS for your VCR. This remote is designed to operate different types of VCRs. VCR. (refer to page 35 for pre-codes) You must first program the remote to match the remote system of your 1. Turn ON your VCR. 2. Aim the remote control at the front of your VCR. 3. Press and release the VCR button to switch to VCR pre-coded mode. 4.
USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box. (refer to page 35) 1. Tum ON your cable box. 2. Aim the remote control at the front of your cable box. 3. Press and release the Cable (CBL) button to switch to Cable pre-coded mode. 4.
USING THE REMOTE TO CONTROL SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver. This remote is designed to operate different types of set-top-box/satellite remote system of your set-top-box/satellite systems. (refer to page 35) systems. You must first program the remote to match the 1. Turn ON your set-top-box/satellite systems. 2. Aim the remote control at the front of your set-top-box/satellite 3. Press and release the SET-TOP-BOX 4.
USING THE REMOTE TO CONTROL Operating the precoded function DVD FUNCTIONS for your DVD player. This remote is designed to operate different types of DVD players. your DVD player. (refer to page 35 for pre-codes) You must first program the remote to match the remote system of 1. Turn ON your DVD player. 2. Aim the remote control at the front of your DVD player. 3. Press and release the DVD button to switch to DVD pre-coded mode. 4.
USING THE REMOTE AUDIO/VIDEO EQUIPMENT TO CONTROL ADDITIONAL Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. system of your Audio/Video component. (refer to page 35 for pre-codes) You must first program the remote to match the remote 1. Turn ON your Audio/Video component you wish to control with the Remote. 2. Aim the remote control at the front of your Audio/Video component. 3.
VCR, CABLE, SATELLITE, AUDIO/VIDEO CODES VCR BRAND ................. Adventura ...................... Aiko ........................... Aiwa .......................... Akai ..................... American High ................... Asha .......................... Audiovox ....................... Beaumark ...................... Bell & HoweJl .................... Broksonic ................. Cai[x CODE 01 09 01 02, 47, 48 23 44 24 44 32 33, 34, 41 .......................... 24 Canon .........................
ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. HELP © 4. Press HELP on the remote control when a menu is displayed, and text will appear giving a description of that menu. This part of the screen shows what selections are available.
ULTRATEC OSD SETUP ,•_ CUSTOMIZE ] Iv'DE0I Set Menu Lanquage Plug & Play Set Antenna/Cable Set Channel Memory Edit Channel Memory View Channel List Set The Clock Magic Focus Picture Formats Choose English, French, or Spanish text. Optimum hook up for your system. Select Antenna or Cable TV. First time set up for channel buttons. Channel buttons, add or skip. Check channel name, scan, and child lock. Set before using timer features. Automatically match red, green, and blue colors to make white.
SET UP Select SETUP when setting your TV up for the first time. Use the THUMB STICK • or • on the remote to highlight the function desired. Set Menu Language Plug & Play Set Antenna/Cable Set Channel Edit Channel View Channel Set The Magic Picture Memory Memory List Clock Focus Formats l Use THUMB STICK • or • I NOTE: I Exit to select the sub-menu of your choice.
SET UP PLUG & PLAY I This guide help to properly set up or Home Theater System. Simply system. answer three graphic questions andfunction a graphicwillwill be you displayed, showing youyour the TV optimum setup for your personalized Welcome To Your Plug & Play On Screen Set Up Guide. Set Menu THUMB STICK Language Plug & Play Set Antenna/Cable Set Channel Memory Edit Channel View Channel Set The Set Top Receiver.
SET UP SET ANTENNA/CABLE I Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV.
SET UP ISET CHANNEL MEMORY[I This feature willchannels automatically TV channels CHANNEL MEMORY. This will allow you to skip unused whenstore usingactive CHANNEL UP (A) in orSET DOWN (T).
SET UP I EDIT CHANNEL MEMORY II Use thiscontrol function after SET•CHANNEL MEMORY is completed to add or erase additional channels to the remote CHANNEL or • buttons.
SET UP I VIEW CHANNEL LIST [I This function you toMEMORY review which channels are labeled in NAME which have been added to EDITallows CHANNEL (SCAN), and which are protected byTHE SETCHANNEL, PARENTALLOCKS. THUMB STICK Set Menu Language Plug & Play Set Antenna/Cable ֩ Set Channe{ Memory Edit Channel Memory View Channel List Set The Clock Magic Picture Menu View Channel A Ch 1 2 3 4 "_ Menu I List Id ESPN ABC BRVO CBS Ant Scan ON ON ON ON 5 **** ....
SET UP SET THE CLOCK [ The time must be set before you can SET PROGRAM TIMER or TV TIME OUT. THUMB STICK Set Menu Language Plug & Play Set Antenna/Cable Set ChanneJ Edit Channe{ View Channel Set The Magic Picture Menu -,,-To._. set Set ....
SET UP I MAGIC FOCUS I Please turn on your television for at least 20 minutes before using this feature. Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called "convergence".
SET UP I PICTURE FORMATS II The PICTURE FORMATS Definition and NTSC signals. function is very useful when setting up reception Set The Standard THUMB STICK Set Menu Language Plug & Play Set Antenna/Cable Set Channel Edit Channel View Channel High Definition, Memory Memory List Clock Magic Focus Picture Formats Menu Press Select I To Menu Bar To Quitl Exit To Set Press Picture Formats Ant A6 Aspect Style _.
SET UP ASPECT STYLE Fill ] This function allows you to select when receiving either NTSC or SDTV. Full screen picture is available in this mode when receiving letterbox signal. Both vertical select Fill for ordinary 4:3 picture. Smooth Wide This function SDTV signal. allows you to select 4:3 picture when is expanded edges will be hidden if you t_Some digital (ATSC formab receiving horizontally either NTSC as being or close to both left and right sides.
CUSTOMIZE This selection NAME THE CHANNEL contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channe s a name when CATV signal source is selected. Change CH+,CH THUMB STICK THUMB STICK Name the Channel Name the inputs Set Favorite Ch.
CUSTOMIZE NAME THE INPUTS Name the ] Use this feature to give a name to any of the five video inputs. THUMB STICK Channel Name the Inputs Set Favorite Ch.
CUSTOMIZE I SET FAVORITE CHANNELS Name II This function allows youcan to group your infavorite channels CHANNELS into six personalized A total of 36 channels be stored the FAVORITE function. categories that you can rename. the THUMB STICK Channel Name the Inputs Set Favorite Ch,_ Set Parental Locks Set I To Menu Ch.
CUSTOMIZE FAVORITE CHANNELS (OPERAT ON) Use this function to display FAVORITE CHANNEL selections as sub-pictures a desired favorite channel. or to tune the main picture to CH THUMB STICK MOVIES 6 Surf To Quit Surf To Quit THUMB STICK Surf To Quit Select a category using THUMB STICK • or I_. Press MENU and the category will be displayed as sub-pictures at the right edge of the screen. This is useful for previewing a category.
CUSTOMIZE I SET PARENTAL LOCKS II This block out the sound of theforselected channel or video input. It canfunction also be will used to keep thepicture TV fromand being viewed a scheduled amount of time that you set. The code to enter SET PARENTAL LOCKS is a four digit secret code number. The factory preset code is 0000. Use the number buttons to select secret code.
CUSTOMIZE I SET PROGRAM TIMER I This function will automatically Name the Name the Set Favor turn the TV on and off, one time only, every day, or once a week. THUMB STICK Channel inputs te Ch Set Parental Set Program Timer [rlput Sensor Video Closed Menu Menu Locks _' Caption Background I ToMenuBar To Quitl Exit I Set Program _, THUMB STICK Timer _1 --:-- O2 O3 O4 AM TV Ofl --:-- AM TV Off Sun (Day -- Channel O Or_ce O O Daily WeeMy Set Timer ® 1 02 03 04 ....
CUSTOMIZE I VIDEO INPUT SENSOR I Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. Press select to set / / J Name The THUMB STICK Channel Set Program Timer Video Input Sensor_ Closed Caption Menu Background Menu I To Menu Name The Channel Name The Inputs Set Favorite Ch.
CUSTOMIZE CLOSED CAPTION Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as r_ or E_' Name the THUMB STICK Channel Name the inputs Set Favorite Ch. Set Parental Locks <> Set Program Timer Video Input Sensor Closed Caption Menu I To Menu Bar ON/OFF will turn the _ AUTO will tum the _ MODE: To Quit I Ex{t Caption Display ® Off Mode ® C.C.
VIDEO I _ Select VIDEO to adjust picture settings and improve picture quality. THUMB STICK THUMB STICK Contrast Brightness Color Tint 'ql_ 4_11_ _1_11. Sharpness ,_11, Reset Advanced [] IP"50% 50% 50% Contrast Settings Menu I To Menu Bar To Quit I Exit Menu I "_, To Menu 100% Bar To Quit I Exit Use the THUMB STICK • or • to highlight the function to be adjusted. Press the THUMB STICK 4 or • to adjust the function. Press EXIT to quit menu.
VIDEO I ADVANCED SETTINGS I Your settings HITACHI to produce Projection the highest TV has quality a PERFECT picture possible. PICTURE function which will automatically adjust picture When PERFECT PICTURE is highlighted, press down on THUMB STICK to turn the PERFECT PICTURE on or off.
AUDIO Models: 61UWX10BA, 43UWX10B I 53UWX10BA, Select AUDIO to adjust the TV to your preference and to improve the sound quality. THUMB STICK Bass Treble 4_1_ 4_1_" Sa_ance Reset Advanced ,_, [] 50% 50% THUMB STICK Sellings Menu I To Menu Bass Treble ,l), 41_lb Salance Reset Advanced _r_ [] 90% 50% Sellings Bar To Quit I Exit Menu I To Menu Bar To Quit I Exit Use THUMB STICK • or • to highlight the function to be adjusted. Press THUMB STICK • or • to adjust the function.
AUDIO Models: I 61UWX10BA, 43UWX10B ADVANCED SETTINGS 53UWX10BA, Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
AUDIO Models: I _ 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B I Select AUDIO to adjust the TV to your preference and to improve the sound quality. THUMB STICK Equalizer THUMB STICK i_ Equalizer <> i A 60 Reset Reset Advanced [] Advanced Settings Menu I To Menu Bar I To Quitl Exit I Menu ' '( 0 [] Settings I To Menu I '( Bar To Quitl Exit I Use THUMB STICK • or • to highlight the function to be adjusted.
AUDIO Models: 61SWX10B, 53SWX10B, 61SWX12B 53SWX12B I Use ADVANCED SETTINGS to improve the sound performance I THUMB STICK Equalizer ©÷ lllil gg 25g Reset Advanced Melm Advanced OSecond Audio I _K THUMB STICK 3K To Meilu Bar To Program []Auto Noise Cancel [] Loudness []Perfect Volume [] Dynamic Bass I To Menu Bar _gK [] Settings THUMB STICK Settings _ Stereo OMonc_ Menu of your TV, depending on listening conditions.
THEATER Models: 61UWX10BA, 43UWX10B I 53UWX10BA, Use this function to choose picture and audio settings for a true home THEATER experience. TREATER MODES J Use this function to choose from automatic picture settings to optimize your TV's performance.
THEATER Models: I 61UWX10BA, 43UWX10B Surround 53UWX10BA, I The following surround settings sports stadiums, movie theaters, THUMB STICK 3 healer Modes Surround _* Menu To Menu will reproduce the "live" sound etc. with only two speakers.
THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Use this function to choose picture and audio settings for a true home THEATER experience. TREATER MODES I Use this function to choose from automatic picture settings to optimize your TV's performance.
THEATER Models: I 61SWX10B, 53SWX10B, SURROUND I 61SWX12B 53SWX12B I I The following surround settings will reproduce the "live" sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 17-18. The surround system is most effective with movie and other stereo material that is Dolby Surround encoded.
THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B I DOLBY PRO LOGIC I Dolby Pro Logic provides four separate sound channels: front left, center, front right, and surround. For properly encoded programs marked [3rl[_p.,_,,oJ the center sound channel contains the dialogue for the program viewed. The left and right channels produce sound effects that will match the action on the TV screen.
THEATER Models: I 61SWX10B, 53SWX10B, DOLBY DIGITAL 61SWX12B 53SWX12B I Dolby Digital provides six independent sound channels: front left, center, front right, surround left, surround right, and sub woofer. Select this feature when viewing properly encoded programs marked To fully benefit from Dolby Digital Surround, it is recommended page 17. L_,e,TI[_A L.
THEATER Models: I 61SWX10B, 53SWX10B, INPUT SOURCE 61SWX12B 53SWX12B II since Set audio input toinputs Digital Analog.DIGITAL This fueature is used only when viewing VIDEO:4 or VIDEO:5 inputs, only these canor accept audio input.
THEATER Models: 61SWX10B, 53SWX10B, LISTENING Theater Surround hlput MODE 61SWX12B 53SWX12B Choose between pre-set audio modes Standard, reduce or increase sound effects. THUMB STICK Modes Night, or Maximum. THUMB STICK Listening Menu Source ITo of these features to Mode 0 Standard O Night Maximum Listening Position Listening Speaker Take advantage Mode Setup Back Quit I Menu Exit ITo Back Quit I Exit Use THUMB STICK • or • to select STANDARD, NIGHT, MAXIMUM.
THEATER 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Models: I SPEAKER SETUP I Select specific speaker Theater Surround output, including a subwoofer.
CARE OF YOUR HITACHI PROJECTION AND YOUR REMOTE CONTROL TV DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened the screen is extremely dirty. in warm water and dry with a soft cloth. A mild soap may be used if Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wall outlet if your television when you go on vacation.
RECEPTION = ...... PROBLEMS = • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. = "-- -- --" = • GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects.
USEFUL INFO SYMPTOMS No Picture, no sound • Sound OK, picture poor • • • • • • • • • • • • Picture OK, sound poor • • • • • • Picture blurred • • • • • • Lines or streaks in picture • • • • • Poor reception on some channels • • • • • Picture rolls verticaJly • • • • • No color • • • • • • Poor color • • • • • • • HITACHI Projection Television incorporates advanced power surge protection technology designed to protect against component or circuit
USEFULINFO Features: • • • Superfine Picture Quality 1200 Line Horizontal Resolution PERFECT PICTURE System Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment.
USEFUL INFO H ITAC H I To locate an authorized HITACHI service in the continental and Canada, facility U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day (1-800-448-2244) Hitachi America, LTD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
H ITAC H I QR48043
