User's Manual

– 16 –

ATTACHING THE AIR PURIFYING FILTERS

Open the front panel

● Pull up the front panel by holding it at both sides

with both hands.

Remove the pre- lter

● Push upward to release the claws and pull out the

 lter.

Attach the pre- lters

● Attach the pre- lters by ensuring that the surface

written “FRONT” is facing front.

● After attaching the pre- lters, push the front panel at

three arrow portion as shown in  gure and close it.

Cleaning and maintenance must be carried out when  lter lamp lights. Before cleaning, stop

operation and switch off the power supply.

CAUTION

NOTE

Claws

(4 places)

Attaching the air purifying  lters

● Attach the air purifying  lters to the frame by gently

compress its both sides and release after insertion

into pre- lter frame.

Do not bend the air purifying

 lter as it may cause damage

to the structure.

● In case of removing the air purifying  lters, please follow the above procedures.

● The cooling capacity is slightly weakened and the cooling speed becomes slower when the air

purifying  lters are used. So, set the fan speed to "HIGH" when using it in this condition.

● Air purifying  lters are washable and can be use in 1 year time. Type number for this air purifying

 lter is <SPX-CFH18>. Please use this number for ordering when you want to renew it.

● Do not operate the air conditioner without pre- lter. Dust may enter the air conditioner and fault may

occur.

RAS-RAC-S18CAK (3).indd 16 8/18/10 9:09 AM