Table of Contents Before Connection .................................................................................................................. 3 For your safety ......................................................................................................................................... 3 Precautions .............................................................................................................................................. 3 Connection ..................................
Disc types MP3 Audio & Video Disc size 12cm single side, single layer / single side, double layer PAL and NTSC DVD disc Playback time 135min/240min max. Audio Disc size 12cm / 8cm CD Disc Playback time 74min/20min Audio MP3 Format disc * Player is CD-R, CD-RW compatible Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated.
Before Connection Thank you for purchasing this hi-fi component system, in order to fully utilize this system, please read this instruction book carefully before use. For your safety CAUTION This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with liquids, such as vases, to be placed on the equipment and don’t handle the power cord with wet hands. DON’T place hot objects or naked flame sources such as lighted candles or nightlights on, or close to equipment.
Connection Caution: Please turn off all the equipment power before connecting. Connect to the TV Connecting diagram Terminal board for the DVD player DIGITAL OUTPUT VIDEO MONITOR VCR SCART INPUT COAXIAL OPTICAL CONTROL CABLE DVD S-VIDEO TV SCART OUTPUT TV Safety precautions Some settings should be made for the unit according to the TV connection. * According to the colour system setting of TV, select the colour system in the “TV Display” function setting.
Connecting Control Cable With the unit unplugged from the mains connect the power control cable to the DVD player, MP3 player, the amplifier and the radio via the connections on the rear of the units as shown . Connect to the amplifier with digital signal input terminal DVD player connections DIGITAL OUTPUT VIDEO MONITOR VCR SCART INPUT COAXIAL CONTROL CABLE DVD S-VIDEO OPTICAL Connection precautions Please note: You can only use coaxial or optical, they can not be used at the same time.
Connecting to a PC The AX-M140 can be connected to a PC via the USB (B) Port on the rear of the unit. Music files on your PC can then be transferred to the Music bank for storage and play back through the AX-M140 HiFi. Your PC should see the AX-M140 Music bank as an external hard drive/storage device then files can be copied, pasted and deleted as desired. Connecting the AC Power Cord Insert the AC power cord into a wall outlet, and your system is ready for use.
The DAB / FM RADIO 1. 2. 3. 4. 5. 6. 7. DAB/ FM ANTENNA CONTROL CABLE DAB/FM Switch Information VFD Display Lens Number Buttons Confirm Select Down Select Up DAB/FM Antenna Jack Control Cable Connector The MP3 Player SEL CANCEL 1. 2. 3. 4. 5. SEL MENU 12. 13. 14.
Remote control 1. 2. 3. 4. 5. Standby DVD Function DAB/FM Function Clock Sleep Timer 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39.
Installation of Batteries in the Remote Control 1. Remove the battery compartment cover. 2. Insert two batteries (size AAA) correctly, so that the + and - polarities match the polarity diagrams in the battery compartment. * About half a year of normal operation can be expected when using standard batteries. * When the batteries are exhausted, the remote will not function. Replace both batteries at the same time with new ones. * Don’t mix old and new batteries. * Don’t mix different types of batteries.
Press the stop/return button (L) to stop playing, the unit will store the last playing time in the memory automatically, then press the play/pause button (BF), the unit will resume to last memory time and continue playback automatically. If you press the stop/return button (L) twice to stop the disc playing. (You can also operate the key “L” on the panel of unit.) Press the volume up button to increase the volume. Press the volume down button to decrease the volume.
Load a Video CD, disc in PBC OFF mode (the MENU button turns the PBC function ON/ OFF). You can select tracks or chapters with the number buttons (0/10,1-9,10+). * If the track or chapter number is less than 10, press the number buttons 0/10,1-9. * If the track or chapter number is over 10, press 10+ button and press the one of the number buttons 0/10,1-9. (Note: If the track or chapter number over 20, press 10+ button twice and press the one of the number buttons 0/10,1-9.
l l When playing a the Video CD, you can choose MONO (Mono Left, Mono Right), “STEREO” or “Mix-Mono” audio output by pressing vocal mode select button (AUDIO). When playing DVD disc recorded with several languages, you can repeatedly press the language select button (AUDIO) to select one of language to play. Audio 1/4 Audio 2/4 Audio 3/4 Audio 4/4 (You can also operate the key “AUDIO” on the panel of unit.
l l When playing CD disc, press the intro button (INTRO) to play the beginning of each track consecutively. The playing time of each track is 10 seconds. When playing a Video CD disc (except for CD disc), press the intro button (INTRO) to enter the thumbnail function, the menu will displayed on the TV screen. Use the , buttons to select digest type (track digest, disc interval or track interval), then press the ENTER button to confirm your choice (the TV screen will display the many picture).
General Setup Page TV Display This menu allows the user to select the aspect ratio of the TV to be connected. Angle Mark Available only when the disc is recorded with angle marks, you can set the angle mark to show on the TV screen or not. OSD Language This menu allows the user to select the language for the on-screen display. Captions Set the captions to on/off (if the disc being played has this feature). Screen Saver Set the screen saver to on/off. Last Memory Set the last memory state to on or off.
Preference Page Audio, Subtitle, Disc Menu You can select subtitles, different audio tracks and languages in this menu, if available. Parental Setup this system when playing a disc which has age control. Default Restore to factory setting. Password Setup Page Password Mode Select this item to set new password for this unit, follow the screen’s indication and enter a password. Password The original password is 136900.
Note: When playing a picture CD, press the L button to enter the “Thumbnail Mode”, use the , , , buttons to move the cursor to illuminate the “MENU” then press the ENTER button to enter the “Remote Key Function” list.
w Scrolling Text The bottom line displays transmitted text giving information regarding the tuned station transmission. w Storing Stations on Preset Buttons 0-9 If a preset button is pressed and held for at least 2 seconds, then that assigns the current station to the selected preset. After 3 seconds the display reverts to the current display mode.
w INFO Button (Unit and Remote) If the INFO button is held down for more than 2 seconds, then this causes the advanced information display to be shown. When the info button is clicked or held subsequently, then the info display returns to the start of the cycle. Pressing INFO once will give you the following option: w Program Type The bottom line displays the static PTY information centred (in the long name format, max. 16 characters).
FM Radio w System Reset To reset switch off, then back on at mains supply. Press and hold “CONFIRM” knob/button and press “STANDBY”. Continue to hold “CONFIRM” until the unit displays “System Reset”. FM Radio will go into scan mode.
w Signal Quality The bottom line displays a graphical representation of the signal quality of the station currently being demodulated. Poor signal quality… Classic FM Good signal quality… Classic FM This display will be continuously updated so that the user can use it to position the radio to obtain the best reception. w Time and Date The bottom line displays the time and the date in the following format (requires RDS transmission).
Press the G button once or more to skip forward one or more tracks. (You can also operate the key “G” on the panel of MP3 player.) In playing mode, you can have the hard disk or USB device played in a random order by pressing the RANDOM button. l In stop mode, press the menu setting button (MENU) to inter the menu setting mode. (You can also operate the key “RANDOM(MENU)” on the panel of MP3 player.) l Press the INTRO button to play the beginning of each track consecutively.
Recording 1. Before recording, please firstly confirm whether the menu is setup to the record setting you need. 2. Place the disc on the disc tray correctly and press play. Press the REC button (REC) to select the record mode, the “REC TO HARD DISK” will be displayed on the VFD. 3. Press the CONFIRM button to enter record, the “Select HD Operation C: or D:” will scroll across the VFD. 4.
WMA files “can” have DRM protection. In this case the file content is encrypted with a key. For playback and decoding it is necessary to have DRM license files on your computer. DRM license can limit your rights for using these functions. For instance, it can allow only playback and prohibit conversion into other formats. When you download music from the internet sites that require you to pay per song, these licenses may be included with the download.
Setting the Daily Timer In standby mode, you can use the daily timer setting to turn the unit on automatically at a certain time everyday under standby mode. When the setting timer is on, the timer indictor “ ” will display on the VFD, however the clock must be set correctly for the timer function to work. - In standby mode, press the timer button (SLEEP) twice, hour indicator will blink. - Set the hour with the C button or D button. - Press the timer button (SLEEP), minute indicator will blink.
Protect the Disc 1. To keep the disc clean, please don’t touch the disc’s surface when you are holding it. You should hold the edge. 2. If the disc is dirty, it will affect the sound quality. Please use the clean and soft cloth to wipe the disc from inside to outside. Don’t wipe the disc in circular motion. 3. Don’t stick paper on the disc. 4. Don’t place discs in direct sunlight or near or on heat sources. 5. After you have finished with the disc, please place it back in its original case.
Specification System Power supply ............................................................. ~230V / 50 Hz Rated working power consumption .......................... £ 130W Channel ..................................................................... ³ 40dB Distortion ................................................................... £ 0.7% Dimensions ...............................................................
This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Partmaster Direct can provide accessories, spares, batteries and replacement parts with Next Day Delivery available upon request.