Operation Manual

GB-15
Connecting the AC Power Cable
Insert the AC Power cable into a wall outlet, then your
unit is ready to use.
Caution:
* Be sure to unplug the power plug from the outlet
when going out or when the unit is not in use for
an extended period of time.
ECO-Power/Standby Features
Switching ON / OFF
When you rst connect the unit to the DC Jack, the unit will be in standby mode.
• Press the standby
button to switch the unit on. The word “HELLO” will show in the display.
• Press the standby button to switch the unit back to standby mode. The words “BYE BYE”
will scroll across the display.
Switching the system to ECO Power/Standby mode
Press and hold the standby button for 2 seconds or more to switch to ECO Power Standby
or normal standby.
* ECO Power standby mode
The clock will not be displayed. Press the
CLOCK
button to display the clock on the LCD.
* Normal standby mode
The clock display on the LCD.
Setting the Clock
Setting the Clock Manually
Caution: You can set the clock in standby mode only.
1. In standby mode, press and hold the clock button (
CLOCK
), the VFD will display CLOCK
SET and CLOCK 24 begins to blink.
2. Set the 12/24 hour format with the
VOL-
or
VOL+
button.
3. Press the clock button (
CLOCK
), hour indicator will blink.
4. Set the hour with the
VOL-
or
VOL+
button.
5. Press the clock button (
CLOCK
), minute indicator will blink.
6. Set the minute with the
VOL-
or
VOL+
button.
7. Press the clock button (
CLOCK
), the built-in clock starts operating.
Note:
• To exit clock setting mode without storing, press the stop button (
L
).
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
Downloaded from www.vandenborre.be