USERS GUIDE C2125T/S CL2125T/S CP2125T/S
Contents Remote Control Buttons ................................. 2 Control Panel Buttons ..................................... 3 Connect Peripheral Equipment ...................... 4 Via the SCART connector .............................. 5 Via Ant Input .................................................... 5 Decoder .......................................................... 5 Connecting a decoder with an aerial socket to the TV ........................................
Remote Control Buttons = Stand By 0 - 9 = Direct Program I-II = No Function MENU = MENU = Programme Up (Cursor Up) = Cursor Right / Volume + TV = TV / Quit Menu (Red) = Sound Menu (Green) = Picture Menu F (Yellow)= Feature Menu (Blue)= Installation Menu Teletext Buttons = Time = Hold = Reveal = Index Page = Teletext AV = External Source (AV1, AV3) = Programme Down (Cursor Down) = Cursor Left / Volume - - = Two Digit Program Number Entry = Mute GB - 2 -
Control Panel Buttons Front AV input POWER = Power On / Off -VOLUME = Volume - AUDIO L = Audio left (white) VOLUME+ = Volume + AUDIO R = Audio right (red) - PROG = Program - VIDEO = VCR (yellow) PROG + = Program + H-PHONE = Headphone 3,6 mm Ø GB - 3 -
Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV.
Via the SCART connector Your TV set has one SCART connector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have SCART connectors, to your TV, use EXT1 inputs. Via Ant Input If you want to connect to your TV, peripherals like videorecorders or decoders, but the device you want to connect does not have SCART connector you should connect it to the ANT input of your TV set. Decoder Cable TV offers you a wide choice of programs.
Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
DONTs DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode.
6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet and also remove aerial socket. 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. 8. Servicing Please refer all servicing to qualified personnel.
Before Switching on your TV Power connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Aerial Connections Connect the aerial plug to the aerial input socket located at the back of the TV. How to connect other devices IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are on the back of the TV.
programme corresponding to the flashing number pressing RED button. If you do not accept the correspondence between programme numbers and names and want to change them, press MENU button and then BLUE button, so that you enter the Installation menu. In the Installation menu select TUNING menu and enter it. To use tuning menu, refer to the Tuning submenu in the Installation Menu section of this manual.
Sound Menu Menu System To change sound settings Your TV has been designed with a menu system, to provide an easy manipulation of a multifunction system. The TV is controlled by choosing the commands displayed on the screen. Below is described the use of the menu system. Press Menu MENU button. Main menu will be displayed on the screen. On the remote control each option is identified with a different colour.
Picture Menu Setting Contrast: To change picture settings: Using Enter the Picture Menu directly, pressing the GREEN button or, Press button to increase contrast level. Press button to decrease contrast level. or button select Contrast. Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button.
Picture Mode Menu: This menu is used to change the picture size according to the coming transmission. If auto function is selected, then the picture size will be automatically changed according to the transmission. Selecting 4 : 3 mode forces picture ratio size to 4 : 3. Selecting 16 : 9 mode forces picture ratio size to 16 : 9. Child Lock: You can use this feature to prevent display of any programme you do not want to be watched. The Child Lock feature may be set to either On or Off.
Automatic Search Programme will be the first selected item as you enter the TUNING menu. Pressing or button select the programme where you want the tuned station to be stored. (You may also type the programme number using the digit buttons.) Press or button to select Band. Using or button, select the band in which search is to be made. or button, select Search. With the Search can be made either forward, pressing button.
to that flashing number by pressing the RED button. If you do not accept the line up between the programme numbers and names and want to change them, press the MENU button and then the BLUE button, so entering the Installation menu. In the Installation menu select the TUNING menu and enter it. To use the TUNING menu, refer to the Tuning submenu in the Installation Menu section of this manual. To delete a channel from a programme number: Move the flashing onto the channel you want to delete.
Selecting Country Press menu. MENU button so that you enter the main In the main menu select Installation using button. or or Open the installation menu pressing the button. (To open the Installation Menu di rectly, do not enter the main menu but only press the BLUE button). In the installation menu select TV Setup using or button. Open the TV Setup menu using ton. or In the TV Setup menu select Country using button.
To Stop Automatic Page Change The teletext page you have selected may contain more information than what is on the screen; the rest of the information will be displayed after a period of time. Press change. button to stop the automatic page Press button again to allow the next page to be displayed. To Select a Subpage Page Subpage pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time. Select the required Teletext page. button.
Specifications TV BROADCASTING STANDARD .............. PAL B/G PAL SECAM B/G L/L RECEIVING CHANNELS ............................. VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS ........... 100 CHANNEL INDICATOR................................ On Screen Display RF AERIAL INPUT ....................................... 75 Ohm (unbalanced) OPERATING VOLTAGE .............................. 220-240V AC, 50 Hz. AUDIO OUTPUT .........................................
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.