Operation Manual

The Solid Background feature controls the appearance of the OSD (On Screen
Display) window environment, with either a solid or transparent appearance to the
OSD. There are two modes to select from and these are simply ON and OFF. Follow the guide below.
This feature is used to set the condition of Scart 2 Audio/Video input socket. If, for example, you
regularly connect external equipment such as S-VHS (Super VHS) Video recorders or cam-
corders to AV2, then the TV can be set to SAV mode to accommodate such equipment. Standard AV mode can also be set if desired.
The Feature Menu also incorporates a Sleep Timer Facility. This allows the user to input a
set amount of time before the TV automatically shuts down in to Stand by mode. The amount of time is input in 5 minute
intervals, to a maximum of 120 minutes ( 2 hours). When there is only 60 seconds remaining a countdown appears in
the top right hand corner of the screen.
Feature Menu
Feature Menu
Solid Background
Solid Background
Scart2 Auto Mode
Scart2 Auto Mode
Sleep T
Sleep T
imer Function
imer Function
Feature
Solid Background
Scart2 Auto Mode
SAV
Sleep Timer
OFF
With Solid Background
deselected the OSD window
becomes transparent, allow-
ing you to view the TV pic-
ture behind the OSD.
With Solid Background select-
ed the OSD window
becomes solid.
An example of the Sleep Timer function with
25 minutes entered is shown.
14
14
NOTE: The 4:3 default mode relates to Wide Screen modes. Please refer to page 17 for instructions
on settings
= Select = Adjust Menu = Exit
Feature
Solid Backround
Scart2 Auto Mode SAV
Sleep Timer 25
4:3 Default 14:9L
✓
= Select = Adjust Menu = Exit
Feature
Solid Backround
Scart2 Auto Mode SAV
Sleep Timer OFF
4:3 Default 14:9L
✓
Adjust the controls ON or OFF
using the up or down
handset buttons. Press MENU
to exit.
4
Press the MENU button
on your handset until the
MAIN MENU appears.
1
Press the BLUE colour coded
button to view FEATURE menu.
2
Select SOLID BACKGROUND
mode by using the up/down
buttons.
3
Adjust the controls by using the
left or right handset buttons.
Pres MENU to exit.
4
Press the MENU button
on your handset until the
MAIN MENU appears.
1
Press the BLUE colour coded
button to view FEATURE menu.
2
Select SCART2 AUTO MODE
mode by using the up/down
buttons.
3
Adjust the time value by using
the left or right handset
buttons. Pres MENU to exit.
4
Press the MENU button
on your handset until the
MAIN MENU appears.
1
Press the BLUE colour coded
button to view FEATURE menu.
2
Select SLEEP TIMER mode by
using the up/down buttons.
3