Operation Manual

In addition to the standard features found, your TV also has NICAM sound capabilities. NICAM transmitted signals provide

stereo sound whilst viewing the TV in NICAM mode, thus giving the user even greater listening pleasure. The TV also pro-

vides 16:9 (Wide Screen Format) viewing capabilities, together with automatic wide screen detection software built in.

The Nicam facility features two modes which provide the viewer with various sound effects.

These features are activated by pressing the key on the handset. When repeatedly pressed

the TV will cycle through each mode and will display a particular on-screen symbol. The various

modes and on-screen identification is explained below.

This effect enhances NICAM digital

stereo by forcing a wide area of sound

from the TV. Use this mode when viewing action movies

or sports events to obtain spatialising acoustic perfor-

mance. When selected the symbol shown below appears

at the top right hand corner of the screen.

This effect produces NICAM

digital stereo sound from the

TV. Use this mode for the majority of TV viewing.

When selected the STEREO symbol is displayed in

the top right hand corner of the TV screen as

shown.

NICAM Features

Nicam Features

Stereo

ide Stereo

In monaural mode the TV

transmits a single sound

source. The TV will automatically select this sound

when a mono signal is found. Some stereo signals

can become poor in adverse weather conditions,

and mono should be selected to avoid poor

sound. Use the I-II

key to switch to mono (the

symbol below appears when switched).

Monaural

Pseudo stereo creates an ambient

sound from mono signals imitating

that of stereo sound.

Use the key to select Pseudo Stereo. When

selected the symbol shown will appear in the top right

hand corner of the screen.

Pseudo Stereo

➔