USERS GUIDE C28WF560N C32WF560N
Contents Remote Control ............................................. 2 Other Features ............................................ 18 Control Panel Buttons and Rear Panel ....... 3 TV Status ............................................................ Double-digit (- -) .................................................. Sound Indicator ................................................... Picture Mode ...................................................... Mute Indicator ...................................
Remote Control = Stand By 0 - 9 = Direct Program - - = Double Digit AV = External Source (EXT-1, RGB, EXT-2, F-AV, SVHS) I-II = Mono / Stereo - Dual I-II = Programme Up (Cursor Up) = Cursor Right / Volume + MENU = Menu TEXT = Teletext = Info (Program Menu) / = Reveal = Hold / Picture Mode Change *** (Blue) = Install Menu F (Yellow) = Features Menu (Green) = Picture Menu (Red) = Sound Menu = Programme Down (Cursor Down)
Control Panel Buttons and Rear Panel FRONT PANEL )URQW $9 )$9 REAR PANEL = Power On / Off = Program - / Program + = Headphone 3,6 mm Ø MENU = Menu = S-VHS Aerial Input (75 W) = Audio left (white) / right (red) EXT.1 = Scart Socket 1 (with RGB) = VCR (yellow) EXT.2 = Scart Socket 2 (with RGB) = Volume - / Volume + Power Cable -3- 28-3217W-1244UK-ENG-ST7P-AK45-BSI-PLL-FS-RF-TILT-CLED-50047944.p65 3 13.07.
Connect Peripheral Equipment CAMERA AUDIO HEADPHONE VIDEO DECODER FOR SATELLITE RECEIVER Aerial Connections 2XWGRRU $HULDO &RQQHFWLRQV 5RXQG RKP FRD[LDO FDEOH : 9+) 8+) 5HDU RI 79 Your TV is fitted with a "True Flat" picture tube. The surface of the screen is coated with a transparent foil coating. Care is need in the cleaning of the screen to prevent damage. To Clean: Clean the laminated screen with a soft, clean, cotton cloth.
Copy Facility Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The connection diagrams on the previous page show you where the different equipment should be connected at the back or the front side of the TV. Via the Euroconnector Your TV set has one, two or three Euroconnector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use optional EXT.1 or EXT.2 inputs.
Preparation Safety Precautions For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV Dos and Donts DOs Use this apparatus in tropical and/or moderate climates. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels.
DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided - to ensure complete safety always use the manufacturers approved stand with the fixings provided. DONT allow electrical equipment to be exposed to rain or moisture. 5. Ventilation The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway. ABOVE ALL 6.
NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Before Switching on your TV Power connection IMPORTANT: The TV set is designed to operate on 220240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
as you change the language, the menu items will be displayed in the selected language. By pressing the or buttons, come to the Tuning Mode item and select the mode at which your TV will run the A.P.S.. If you select Channel Tuning Mode, A.P.S. will run according to Channel Tuning Mode and will auto-search according to the Channel numbers of the stations in your area. If you select Frequency Tuning Mode, A.P.S.
Setting Volume Menu System Your TV has been designed with a menu system, to provide an easy manipulation of a multi-function system. The TV is controlled by choosing the commands, which are displayed on the screen. Press the MENU button. The MENU will be displayed in the middle on the screen. All the selected items in this menu system is indicated with HIGHLIGHTED characters and with an arrow on the leftside of items. As you enter the sound menu, Volume will be the first selected option.
In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. To Change Headphone Sound Settings Pressing or button on Headphone, enter the Headphone menu. This is a sub-menu of Sound menu, and all options in this menu are working as the same in the Sound menu. +] +] .+] .+] .+] 02'( 3(56 21$/ 6725( In Mode item there are four predefined and one user defined options.
Picture Menu To enter the Picture menu directly, press the Green button, or Press MENU button, now you are in MENU. In the MENU, select PICTURE using or then enter the Picture menu pressing button. %5,*+71( 66 &2175$67 &2/2 85 6+$5 31(66 7,/7 button, or 3,&785( )($785( ,167$// 0$18$/ &2/2 85 7(03 1250$/ Setting Sharpness Using 6281' 3,&785( 02'( or button select Sharpness. Press button to increase peaking level.
may be progressively enlarged using the buttons. or 16:9 Setting Picture Mode This item is used to change the picture mode. By pressing or button you may select one of these options: BRIGHT, STANDARD, SOFT, MANUAL. This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display. Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally.
Feature Menu To enter the FEATURE menu directly, press the Yellow F button, or Press MENU button, now you are in MENU. In the Select the ZOOM mode: Press the or MENU, select FEATURE using button to select a ZOOM mode. or Then enter the FEATURE menu pressing button. button.
EXT-2 Output From EXT-2 Output, either TV, EXT-1 or F-AV can be given. TV, EXT-1 or F-AV can be selected by pressing or button on EXT-2 OUTPUT. Tuning Mode Selecting Channel Press or button to select TUNING MODE. By pressing or button , you can select the mode in which you want the search to be made, CHANNEL mode or FREQUENCY mode.
Then enter the Program menu pressing button. or 6281' 3,&785( )($785( ,167$// 352*5$0 Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy about the image on the screen. or button on FINE TUNING item, until Use getting the best image on the screen. In Channel option, normally the Fine Tuning cursor is placed at the middle on the slider, and this is indicated with the two reciprocal arrows.
button (seen above). Name allows changing the programme name. By Delete you can delete programmes that you do not require. Insert section is for inserting programmes into another programme spaces. By selecting Autostore section, Autostore menu will be available. Name: To change the name of a programme, select the programme and then press the RED (Name) button. The first letter begins to blink on the selected name.
SUBTITLE, ZOOM, PANORAMIC or AUTO is written. Other Features TV Status Programme Number, Programme Name (or AV) and Sound Indicator are displayed on the upper left of the screen. They are displayed after programme change during 3 seconds. 3 35 Mute Indicator Programme Number Programme Name (4 characters) These OSDs are displayed when a new programme is entered by digit button, by pressing or by TV button.
To Stop Automatic Page Change Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume control is available in text mode.
Tips Specifications Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi Television.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato- Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.
