User manual

147
English
QR34962
No DVD Video Camera/Recorder Operation -
Check the Following:
Check 1 No movie can be recorded
Movie can be recorded only on DVD-RAM or DVD-R
disc.
Check the following:
• Is DVD-RAM or DVD-R disc inserted?
• Is power switch set to “ VIDEO”?
• Is the DVD-RAM disc in DVD video camera/
recorder write-protected? Release the write-
protect.
• Does disc have remaining recording space?
Ifmoviestillcannotberecordedaftertheabove check
is clear, the disc may be damaged: Use another disc.
Check 2 No still can be recorded
Still can be recorded only on DVD-RAM disc, SD
memory card or multimedia card.
Check the following:
• Is DVD-RAM disc, SD memory card or multimedia
card inserted?
• Ispower switchset tomatchtherecordingmedium?
− When using DVD-RAM disc:
Set to “
 PHOTO”.
− When using SD memory or multimedia card:
Set to “
 PHOTO”.
• Is loaded DVD-RAM disc write-protected?
• When using SD memory card: Is it locked?
• Doesdiscorcard have remainingrecording space?
If still cannot be recorded after the above check is
clear, the disc or card may be damaged: Use another
disc or card.
Check 3
Skip or search playback does
not work well
If the temperature inside the DVD video camera/
recorder is high, normal operation may not be
possible. Turn the DVD video camera/recorder off,
wait for a few moments, and then turn it on again for
operation.
Check 4
• No operation can be
performed because the
ACCESS/PC or CARD
ACCESSindicatoronthis DVD
video camera/recorder
remains lit or blinking.
• After discor card is inserted, it
takes some time until
recording is possible.
Inthefollowingcases,it will takemoretimethanusual
until operation is possible:
• When disc or card is removed and then reinserted
• When datechanges(e.g., during the first recording
of the day)
• When the temperature is greatly different from the
status of previous recording
• When disc with scratches, dirt or fingerprints is
inserted
• When disc is subject to severe vibrations
• When the battery or DC power cord was
disconnected instead of following the correct
procedureusingpowerswitchtoturntheDVDvideo
camera/recorder off