User's Manual

85
English
Setting Up Record Functions

SWITCHING MOVIE QUALITY (VIDEO MODE)
Choose the movie quality from “XTRA” (only with DVD-RAM disc), “FINE” and “STD”.
1Press the MENU button,
choose “VIDEO Mode”
on the “Record Functions
Setup” menu screen, and
then press the
button.
2Choose the desired quality mode, and then press
the
button.
3Press the MENU button to end the setting.
Note:
• The movie quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• The “VIDEO Mode” setting will not change even if the
DVD-RAM disc is replaced with a DVD-R disc, or vice
versa. However, if “XTRA” has been set with DVD-RAM
disc, “FINE” will be set when the disc is changed.
• When using DVD-R disc, you cannot switch the movie
quality while recording on the disc: The DVD video
camera/recorder will be automatically set to the movie
quality first used with the disc for recording.
• The movie quality setting is effective only during movie
recording: Switching the movie quality will not work
during still recording.
It is recommended that you record critical subjects in the “XTRA” or “FINE” when you are using a DVD-
RAM disc, or in the “FINE” with a DVD-R disc.
Record Funct i ons Setup
FINE
STD
RAM
XTRA
VIDEO Mode
Se l f T i mer
OSD Ou t p u t
ENTER RETURN
3 0 MIN
0:00:00
REM
FINE
17:00
30/ 9/2003
Movie quality