User's Manual

8.2.7.1. MOTION

 When there is movement of the subject on the screen there

will be an alarm, or the user will be informed through com-

munications on “MD” will display on the screen.

 NOTE: There is a signal every time there is move-

ment by the subject. If motion is detected, MD

(Motion Detector) is displayed on the upper left of

the screen.

 Caution: An error can occur in the motion detection func-

tion in the following cases:

 When lighting is unsteady

 When light changes often even though there is no

movement of the subject.

Note: It is recommended that this function should be used after setting the

detection sensitivity and the zone state after videoing the environment for an

extended time.

MOTION

ZONE SELECT CENTER

ZONE STATE OFF

SENSITIVITY 8

INITIAL OFF

EXIT

ZONE SELECT

 Zone can be set to UPPER, RIGHT, CENTER, or WHOLE

detection field as shown.

SENSITIVITY

 Sets sensitivity to detect movement from 1 (low) to 15

(high).

FOCUS

EXPOSURE

BLC

WHITE BAL

3D-DNR

SPECIAL

GENERAL

INITIAL

EXIT

UPPER

LEFT CENTER RIGHT

LOWER