Users Guide CL2554AN/CL2854AN
TABLE OF CONTENTS IMPORTANT SAFEGUARDS ................................................................................2 TV INSTALLATION................................................................................................3 • Inserting batteries into the Remote Control ...................................................3 • Aerial connection & Mains connection ..........................................................3 • TV controls...................................................................
IMPORTANT SAFEGUARDS For your own protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions, and instructions on the appliance, and those described in the operating instructions, and adhere to them.
TV INSTALLATION INSERTING BATTERIES INTO THE REMOTE CONTROL Insert the batteries (two 1.5V type AAA) supplied with the set. Make sure that the polarity matches with the (+) and (-) marks inside the battery compartment. Do not forget to Replace the battery cover. AERIAL CONNECTION & MAINS CONNECTION GB When using an outdoor aerial, it is usually connected to the set by means of 75 ohms coaxial cable. For correct colour reception an effective aerial installation is most important.
IDENTIFICATION OF REMOTE CONTROL FUNCTIONS TV MODE 1. GB POWER ON/OFF (stand-by mode) 2. 0-9 3. OK 3. NORMAL Picture selection Channel selector 4. TV/AV selector 5. PR (CURSOR) UP 6. PR (CURSOR) DOWN 7. 10. 11. 12. Display ON/OFF MUTE RECALL SLEEP 13. Display status of viewed channel TV / TEXT 1. POWER ON/OFF (stand-by mode) 2. 1 2 3 4 5 6 7 8 9 4 2 NORMAL/OK 0 PR 3 5 0-9 Teletext page selector 3. INDEX page 4. MIX 5. PAGE UP 6. PAGE DOWN 7. SUBPAGE 8.
TUNING IN THE TV CHANNELS AUTOMATIC TUNING ❒ MENU SELECTION Press remote control MENU button to display main menu. Move the cursor to INSTALL by using " or " and " PR PICTURE SOUND FEATURES INSTALL or " buttons. Then press OK button to get INSTALL menu. PR ❒ COUNTRY SELECTION Position the cursor at ATSS Menu and select country code where TV is used INSTALL by pressing " ATSS or " buttons.
TUNING IN THE TV CHANNELS ❒ SKIPPING THE CHANNELS EDIT Position the cursor to the programme number you wish to skip, then press the SKIP button. A skipped programme is marked with the sign "✔" at its left end. The channel corresponding to a skipped programme will not appear on screen when changing channels using " or " buttons.
DAILY TV OPERATION SELECTING A PROGRAMME NUMBER The set has a total of 100 programme numbers, 0…99. The numbered buttons 0…9 are used for direct programme selection. In order to select a two digit programme, press the second numbered button within two seconds. You can » buttons.
DAILY TV OPERATION FEATURES MENU ❒ CHILD LOCK ON/OFF MENU Position the cursor on the CHILD LOCK menu and by pressing « or » buttons, you may select ON or OFF. When the CHILD LOCK is ON and TV is in STAND-BY mode it can not be operated without the remote control hand set and LED indicator lights up orange instead of red. GB ❒ CLOCK MENU The clock is set automatically if program NR 1 is selected on screen for at least 6 seconds, provided the program NR 1 has teletext data.
TELETEXT The teletext service is carried on a TV transmission signal, therefore it is only available when receiving a TV programme. Your choice of programme also governs which teletext service you will receive (CEEFAX for BBC1 and 2, Teletext for ITV and Channel 4). ❒ SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( return to the TV mode. ). The index page viewed last page will appear.
CONNECTING EXTERNAL EQUIPMENT HEAD PHONE SOCKET (STEREO) When you insert a headphone plug (3.5 mm) stereo into the headphone socket, the sound from the speaker will automatically be muted. GB FRONT AV SOCKET (AV2) Connect the AV (AUDIO/VIDEO) socket with an appropriate cable to the corresponding socket of the external equipment. Select AV mode by pressing the AV button ( ) twice. Press the AV button twice to return to the TV mode.
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Checking these points before asking for service could save you time and money. CHECKPOINT SYMPTOM No picture and sound Check the TV set is plugged in. Check the Volume, Brightness, and Contrast controls are not set at minimum. Picture is OK, but no sound Check the volume Control is not set at minimum.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.