Color profile: Disabled Composite Default screen Notice d'utilisation CL2143S F Gebruiksaanwijzing NL Instructions for use GB Istruzioni per l'uso I Manual de Instrucciones E Bruksanvisning S Bruksanvisning N D:\Aldus Page Maker Onemli\IB-NEW\HITACHI\Ak30\CL2143S\Cover Page Ak30 Hitachi 7 Dil-5003xxxx.
Contents Remote Control Buttons ................................................. 34 Other Features ................................................................ 44 Control Panel Buttons .................................................... 35 TV Status ...................................................................... 44 Programme Swap (P
Remote Control Buttons = Stand By I-II = Mono/Stereo - Dual I-II 0 - 9 = Direct Program =Previous Programme - - = Double Digit = Info (Program Menu) = Programme Up (Cursor Up) = Cursor Right -VOL / VOL + = Volume - / Volume + Yellow (FEATURE) = Feature Menu Blue (INSTALL) = Installation Menu = External Source (AV-1, F-AV, RGB) Teletext Buttons = Teletext = Update = Hold = Index Page = Reveal = Expand = Time = Mix = TV / Quit Menu Red (SOUND) = Sound Menu Green (PICTURE) = Picture Menu = Programme Down (Cur
Control Panel Buttons POWER / / = Power On / Off = Volume - / Volume + - P / P + = Program - / Program + Front AV input AUDIO L / R = Audio left (white) / right (red) )URQW $9 VIDEO = VCR (yellow) Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The connection diagrams show the back of the TV where the different equipment should be connected.
Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different equipment should be connected at the back side of the TV. Via the Euroconnector Your TV set has a Euroconnector socket. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use SCART 1 input.
Preparation Safety Precautions Place the TV on a solid surface. If placing the TV into a cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides and rear and top of the TV. This is to allow for adequate ventilation during operation. Please read below for more safety information before installation.
ABOVE ALL 7. Servicing NEVER let anyone, especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electric shock. Please refer all servicing to qualified personnel. Do not remove the back cover as this may result in an electric shock. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry! 1.
located below the TV turns on. Before Switching on your TV 2- To switch on the TV from stand-by mode either: Power connection IMPORTANT: The TV set is designed to operate on 230V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Connections to the RF input socket Connect the aerial or cable TV plug into the RF input socket on the back of the TV.
Press button to select the next programme. Programme Selecting (direct access): Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 99, you must use the double digit button "- -". this OSD is displayed at the left hand upper on the screen. After this, press the digit buttons consecutively for the programme you want to select (eg. for programme 27, first press 2 and then 7).
options, the MODE is switched automatically to USER option. The USER option may be adjusted by the user. The 5 items below the MODE are available to adjust the sound settings in 5 frequency values: 120 Hz, 500 Hz, 1.5 kHz, 5 kHz and 10 kHz.
Press Feature Menu button to decrease contrast level. To enter the Feature menu directly, press the YELLOW button, or Press " " button, now you are in Main menu. In the Main menu, select FEATURE using or button. Then enter the Feature menu pressing or button. Setting Colour Using or button select Colour. Press button to increase colour level. Press button to decrease colour level.
To Store Settings Press " " button, now you are in Main menu. In the Main In Feature menu all settings are stored automatically. menu, select PROGRAM. using or button. Then Install Menu enter the Programme menu pressing or button. To enter the Install menu directly, press the BLUE button, or Press " " button, now you are in Main menu. In the Main menu, select INSTALL. using or button. Then enter the Install menu pressing or button.
"CANCEL" option will be valid. This option cancels the name process, if the new name do not want to be stored. When the GREEN button is pressed, "NAME", "AUTOSTORE" and "DELETE" functions are erased, the selected programme (A) is displayed with green characters. From now on, the automatic selection is canceled. Cursors moves are indicated with CYAN characters.
Sleep Timer Last Minute Indicator Teletext It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds. If there is only one minute of the countdown left of the timer, it is displayed automatically on the upper left of the screen, and stayed there until finishing. Then TV goes automatically to stand-by. Teletext is an information system that displays text on your TV screen.
To Select Double Height Text Tips Press button for the top half of the information page to be displayed in double height text. Press button again for the bottom half of the information page to be displayed in double height text. Press button once more for the full page of normal height text. To Reveal concealed Information Pressing button once will reveal answers on a quiz or games page. Pressing swers.
Specifications TV BROADCASTING PAL SECAM B/G D/K L/L RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20 / S21-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 230V AC,50 Hz. AUDIO OUTPUT German + Nicam Stereo AUDIO OUTPUT POWER (WRMS.) (%10 THD) 2x8 POWER CONSUMPTION (W) (max.) 95 PICTURE TUBE 21 (55 cm.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.